Installation
Install door external handle (if external handle is present).
Step 1
Take out 4 screws (1) and handle base (2) from accessory bag. Then fix the
handle base (2) with door by 4 screws (1).
Step 2
Insert handle cover (3) in the handle base (2) until a click.
Step 3
Screw lock catch (4) on the freezer cabinet by anther 2 screws (1).
Note:
If the lock ring failed to hold
the lock when installing handle,
please unscrew the round head
screws (5) on the back of door and
adjust the position of door upper
and lower. Then drive the screw to
fix the handle.
To Next Page
Loading...
