-16-
Troubleshooting
PROBLEM POSSIBLE CAUSE SOLUTION
Does not
work
• No power to unit
• Power cord is unplugged
• Wrong voltage is being used
• Check connection of power cord to power source
• Plug in the unit
• Use proper voltage
Freezer
runs contin-
uously
• Temperature set too low (too cold)
• Door is not closed
• Hot food inserted
• Door opened too long or too often
• Close proximity to heat source or direct sunlight
• Set temperature higher (warmer)
• Close door securely
• Be sure food is at room temperature before inserting
• Minimize door openings/duration
• Do not place unit close to heat sources or direct sunlight
Internal tem-
perature not
cold enough
• No power to unit
• Power cord is unplugged
• Temperature control set too high (too warm)
• Door is not closed
• Hot food inserted
• Door opened too long or too often
• Air fl ow obstruction
• Wrong voltage is being used
• Close proximity to heat source or direct sunlight
• Check connection of power cord to power source
• Plug in unit
• Check setting and change as needed
• Close door securely
• Be sure that food is at room temperature
• Minimize door openings/duration
• Allow room for air to circulate around the unit
• Use proper voltage
• Do not place unit close to heat sources or direct sunlight
Temperature
too cold
• Temperature control is set too cold • Adjust the temperature
Noises • Parts are expanding / refrigerant is circulating • This is normal
To Next Page
Loading...
