GENERAL DESCRIPTION OF REFRIGERATOR
1.Upper Cover 2. Thermostat
3. Refrigerator Shelf 4. Salad Crisper Cover
5.Salad Crisper 6. Adjustable Foot
7.Egg Tray 8. Pocket Rack
9.Bottle Rack
When transporting, hold the base and lift the refrigerator carefully with the tilted angle more
than 45 degree. Never hold the door handle as support. Never place it upside down,
horizontal wise or get it extruded. Push refrigerator about by making its two hind roller feet as
axis and then tilting it slightly during moving indoors.
TRANSPORTATION AND HANDING
INSTALLATION
1. Install the refrigerator at a place with a flat, firm ground directly, to prevent vibration and
noise.
2. Choose a well-ventilated place. A space of no less than 10cm must be left around the
refrigerator.
3. Choose a location where there is no heat source. Keep the refrigerator away from direct
sunlight and oven etc..
4. Choose a dry and well-ventilated place where there is no corrosive air.
-15-
To Next Page
Loading...
