74
Setting the Start and End Time Function
1. Turn the function selector knob and the temperature control knob to set the fuction and
temperature that you require.
2. After entering the cooking time, press , “AUTO” flashes, press and to enter the end time
of the appointment. The appointment time range is 24 hours.
3. The oven will calculate the time that the oven needs to start cooking according to the end time
you set and the length of cooking time, and start working automatically.
4. Current time 12:00 ,
Assuming the set end time is 13:30 and the cooking time is 2 hours,
the oven will start cooking at
11:30 and finish at 13:30.
Setting the Alarm Function
An alarm can be set to ring when needed, including when not cooking. The set time will count
down, and the alarm will ring when the time is up.
1.
In the standby mode, press to enter the alarm setting and flashes.
2.
Display shows “0:00” , press and to input the time of the alarm, and wait for 5 seconds to
automatically confirm. For example, enter “0:30” and the alarm will ring after 30 minutes.
3.
keeps always on, during the period, press to view the remaining time. At the last
minute, press to see the countdown seconds.
4.
After the time countdown is elapsed, the alarm will ring and you need to press to stop.
Note: After turning off the alarm, the oven will continue to work. If you need to stop cooking, please
turn the function selector knob and temperature control knob back to the original position,
otherwise the oven will continue to heat.
To Next Page
Loading...
