BEFORE SEWING
1. Fit plug into the machine.
2. Insert plug into the main socket.
3. Sewing speed can be varied by the foot
control.
Separate the machine from the powersystem
if you leave it unsupervised.
Use only the correct model of foot controller
for your sewing machine, contact the supplier.
Warning: Please always unplug the power plug before you
change the bulb or perform maintenance work to the
machine so that you prevent deadly peril and electric
shock.
Bulb replacement:
1. Open face cover in direction of arrow.
2. Remove bulb by unscrewing it
counter-clockwise.
3. Install a new bulb by screwing it in
clockwise.
4. Use a 15 watt bulb. (max)
5. Make sure the bulb is cold before
removing it.
To Next Page
Loading...