Caution
if there is on the clothes label
it means the clothes can not be ironed.
Clothes material temperature setting
Silk, Nylon (Low temperature) Dry ironing
Wool (Middle temperature) Steam ironing
Linen, Cotton (High temperature) Steam ironing
• Ensure there is enough water in the water tank
STEAM IRONING
• Turn the temperature control knob to suggested position(Please refer to first section of setting
temperature)
• After the heat indicator light turn on and off again, turn the steam knob to suitable position, press
the steam iron can begin steam ironing at once.
• Shut off the iron
DRY IRONING
• Turn the temp control knob to suggested position (see temp setting first section)
• Before clean, please pull out the plug and make the iron cool down fully.
CLEAN METHOD
• Use wet cloth to tidy the soleplate
• Put water into water tank and shake the water tank gently.
Empty the water in the water tank and burn the empty iron for 2-3 minutes.
METHOD FOR CLEAN AND STORE
Turn the steam knob to no steam position and turn the temp control knob to “MIN” position.
Shut off the switch on the base
Pull out the iron and make it cool down
Clean the iron with soft cloth
Put the iron in the box and store it in a dry place.
ELECTRIC SPECIFICATION
To Next Page
Loading...