Need help?Do you have a question about the Joemeek TwinQ and is the answer not in the manual?
The front-end stage that amplifies audio signals from microphones, instruments, or other sources.
A key component providing the characteristic Joemeek sound and dynamic control.
A versatile three-band tone control system for shaping frequencies.
Supplies 48V to condenser microphones. Caution advised when engaging.
Explains how compression ratio is set and how it affects signal dynamics.
Details how the Joemeek optical compressor's ratio varies dynamically with signal level.
Describes the function of controls like Compress, Slope, Attack, Release, Make Up Gain, and Comp switch.
Details how the three-band equalizer stages shape frequencies, including LF, Mid, and HF bands.
Describes the output volume control, connectors, and selectable output levels.
Shows a typical studio setup for connecting microphones, instruments, and recorders to the twinQ.
Guide on setting input gain, phantom power, and monitoring preamp levels.
Instructions on setting compressor controls for desired gain reduction and effect.
Guidance on using the EQ controls for tone shaping and making comparisons.
Advice on making final output level adjustments and using the output gain control.
Steps to diagnose issues when the unit has no power or lights.
Solutions for when the microphone input is not working correctly.
Steps to resolve problems with the line input not functioning.
Diagnosing why the compressor might not be working or how to adjust it.
Tips for adjusting compression levels to achieve desired results.
General| Phantom Power | Yes |
|---|---|
| USB | No |
| Preamp | Yes |
| Input Connectors | XLR, 1/4" TRS |
| Gain Range | 60dB |
| EQ | Yes |
| Compressor | Yes |
| Output Connectors | 1/4" TRS |
To Next Page