Joerns Healthcare EasyCare User Manual

User-Service Manual
Joerns
®
Bed Frames
EasyCare
®
Bed
To avoid injury, read user’s manual before using.

Joerns Healthcare EasyCare Specifications

General

Weight Capacity	450 lbs
Length	80 inches
Height Adjustability	Electric
Frame Material	Steel
Mattress Type	Foam
Wheel Locking	Yes
Head and Foot Adjustment	Electric
Battery Backup	Yes
Type	Hospital Bed
Width	36 inches
Side Rails	Optional

Summary

Important Precautions

General Usage and Safety Warnings

Covers intended use, clear space, bed height, pendant cord, and safe working load.

Hazard Warnings

Addresses transport risks, fire hazards with oxygen, and shock hazards from power.

Mattress and Entrapment Warnings

Details risks related to mattress sizing and potential entrapment when unattended.

System Assessment and Gap Warnings

Recommends clinical assessment and warns about hazardous gaps with assist devices.

Additional Precautions and Cautions

Assist Device and Part Safety

Warns about assist device openings, using only Joerns parts, and accessory compatibility.

Electrical Safety and Grounding

Discusses hospital-grade plugs for grounding reliability and shock hazards.

Operational and Stability Cautions

Covers skin injury from side stops, entanglement, floor lock use, and Care-Lock activation.

System Compatibility Cautions

Mentions battery backup, EMC compliance, and strong emission sources.

Bed System Entrapment Information

Regulatory Context for Entrapment

Discusses regulatory review of bedside rails and entrapment issues.

Joerns Compliance and Safety Solutions

Highlights Joerns' role in compliance and creating safer care environments.

Features and Specifications

Standard Bed Features

Lists the standard features of the Joerns EasyCare bed.

Mechanical and Electrical Details

Provides specifications on dimensions, weight, power, and operating conditions.

Available Accessories and Options

Lists optional accessories and features that can be added to the bed.

Identification Label Symbols Explained

Defines the various symbols found on the bed's ID label.

Assembly Guide

Head Panel Installation Steps

Detailed instructions for mounting the head panel onto the bed frame.

Foot Panel Installation Steps

Detailed instructions for mounting the foot panel onto the bed frame.

Assembly Continued

Baseboard Bumper Installation

Procedures for installing the standard and 12° Trendelenburg baseboard bumpers.

Mattress Stop Installation

Instructions on how to install mattress stops to secure the mattress.

Bed Components and Operation

IV Socket Description

Information about the four standard IV sockets and their compatibility.

Staff Control Panel Installation

Steps to install the optional staff control panel on the bed.

Pendant Controller Operation

How to use the bed's pendant controller for adjustments.

Control Panel Operations

Staff Control Panel Usage and Lockouts

Explains how to operate and lock functions using the staff control panel.

Standard Pendant Control Functions

Details the buttons and functions of the standard pendant.

Advanced Pendant Control Functions

Details the buttons and functions of the advanced pendant, including comfort chair.

Advanced Settings and Transport

Setting Trendelenburg Modes

Guides on configuring the bed for 4° Gravity Assist or 12° Trendelenburg modes.

Bed Transport and Locking Mechanisms

Instructions for using the Roll-in-Low Lock and Care-Lock features for transport.

Care-Fit Width Expansion

Adjusting Bed Width with Care-Fit

Steps to set the mattress support platform width to 35", 39", or 42".

Servicing and Component Identification

EasyLift Leg Positioner Operation

How to operate the leg positioner for raising and lowering.

Power Cord and Grounding Connector Checks

Guidelines for inspecting power cords and grounding connectors for safety.

Actuator and Control Box Identification

Identifies the different actuators and ports on the control box.

Component Replacement Procedures

Control Box Removal and Installation

Steps for removing and reinstalling the bed's control box.

Actuator Replacement Process

Detailed instructions for replacing individual bed actuators.

AC Power Cable Replacement

Procedures for removing and replacing the AC power cable.

Troubleshooting and Maintenance

Bed Response Troubleshooting

Solutions for beds not responding to pendant or staff controls.

Preventative Maintenance Schedule

Recommended monthly inspections and preventative maintenance tasks.

Cleaning Procedures and Cautions

Guidelines for safely cleaning electrical components and bed surfaces.

Accessories and Safety Warnings

General Accessory Use Warnings

General safety warnings regarding the use of bed accessories.

Trapeze and Adapter Installation Guidance

Warnings and instructions for installing the trapeze and adapter.

Drainage Bag Holder Usage Precautions

Guidelines and warnings for using the drainage bag holder safely.

Accessory Installation Details

Trapeze Adapter Installation

Specific instructions for installing the Trapeze Adapter onto the EasyCare bed.

Drainage Bag Holder Installation

Instructions for installing and correctly positioning the Drainage Bag Holder.

Battery Backup System

Battery Backup Components List

Lists the items included in the battery backup package.

Battery Charger Setup and Use

Instructions for setting up and using the battery charger.

Powering the Bed with Battery Backup

Explains how to connect and utilize the battery backup for bed operation.

Warranty and Service Program

Joerns Healthcare Warranty Overview

Details the warranty terms for the EasyCare bed, including duration and coverage.

Parts and Service Information

Information regarding warranty coverage for parts and the service process.