Contents
1. Introduction ................................................................................................................................ 2
1.1. Product description ..................................................................................................... 2
1.2. Typical installation ...................................................................................................... 3
1.3. Package contents ........................................................................................................ 3
1.4. Product dimensions .................................................................................................... 4
1.5. Front view of the module ........................................................................................... 5
1.6. Mounting ..................................................................................................................... 6
2. Configuring the ProFlex using the webinterface ..................................................................... 7
MINIMAL SYSTEM REQUIREMENTS ........................................................................................ 7
LOGGING IN TO THE DEVICE ................................................................................................. 7
GENERAL CONFIGURATION ................................................................................................... 8
DEVICE CONFIGURATION .................................................................................................... 11
1. Input.......................................................................................................................... 11
2. Output....................................................................................................................... 14
3. CAM........................................................................................................................... 17
3. Technical Specifications ........................................................................................................... 18
4. Safety Instructions .................................................................................................................... 19
5. Conditions of warranty ............................................................................................................ 20
No part of this manual may be copied, reproduced, transmitted, transcribed or
translated into any language without permission.
Unitron reserves the right to change the specifi cations of the hardware and software
described in these manuals at any time.
Unitron cannot be held liable for any damages resulting from the use of this
product. Specifi cations are subject to change without notice. 03/17
© Unitron - Frankrijklaan 27 - B-8970 Poperinge - Belgium
T +32 57 33 33 63 F +32 57 33 45 24
email sales@unitrongroup.com
www.unitrongroup.com
To Next Page
Loading...