Models EELR538A and EELR539A
Models EELR540A and EELR541A
Installation, Operation and Maintenance
Page 19
Rev. 08/27/2021
15-18000-IOM-W.doc
REVISIONS
11/06/2019- THE ADAPTER RACK INSTALLATION INSTRUCTIONS WERE UPDATED TO CALL OUT
5/16-18 HARDWARE.
12/03/2019- SPEC PAGE HAS BEEN UPDATED WITH PAD HEIGHTS, MALE ARM HEIGHT, AND ARM
SWING. SYNC CABLE PART NUMBER WERE UPDATED IN PBD. ANCHOR BOLT PART NUMBERS
WERE ADDED TO PBD. ADDED STEP TO CHECK THE ARM STOP BOLTS TO MAKE SURE THEY
ARE TIGHT.
02/13/2020- 12073 WAS CHANGED TO A THREAD CUTTING SCREW
02/18/2021- UPDATED THE ANSI/ALI ALCTV AND ALOIM. UPDATED THE LIFT OVERALL WIDTH.
08/27/2021- OUTDOOR INSTALLATION IS PROHIBITED, SPEC PAGE REORGANIZED, UPDATED FIG
E AND TABLE E.
To Previous Page
Loading...
