What to do if john deer LA115 Tractor engine misses under load?
If your John Deer Tractor engine misses under load, the spark plug may be faulty, so replace it. Stale or dirty fuel can also cause this issue, so replace it with fresh fuel. Additionally, a plugged fuel filter can be the culprit, so clean or replace it.
What to do if John Deer Tractor engine will not start?
If your John Deer Tractor engine won't start, make sure the brake pedal is depressed and the mower is disengaged. Check that the spark plug wire is securely connected and that you're using the correct fuel type. Also, inspect the fuel filter and clean or replace it if it's plugged. Finally, check the safety switch and replace it if it's defective. If these steps don't resolve the issue, refer to the Electrical Troubleshooting Section.
Why does my john deer LA115 Tractor engine lose power?
Your John Deer Tractor engine may be losing power due to several reasons: the engine might be overheating, there could be too much oil in the engine, the air cleaner might be dirty, or the spark plug could be faulty. Also, the travel speed might be too fast for the conditions, or you might be using the improper fuel. In order to solve this problem you should check the engine cooling system, check and adjust oil level, clean or replace air cleaner, replace the faulty spark plug, reduce travel speed, and use proper fuel type.
What to do if john deer LA115 engine overheats?
If your John Deer Tractor engine is overheating, check the engine air intake screen and clean it if it's plugged. Also, clean the cooling fins. Ensure the engine oil level is correct, adjusting if it's too low or too high. Avoid operating the engine for extended periods at a slow idle speed.
Why john deer LA115 Tractor starter does not work?
If the starter on your John Deer Tractor isn't working or turning the engine, the brake pedal may not be depressed, or the mower might be engaged. Ensure the brake pedal is depressed and the mower is disengaged. Corroded battery terminals or a discharged battery could also be the cause, so clean the battery terminals and charge the battery. A blown fuse can also prevent the starter from working, so replace the blown fuse. If the fusible link in the starting circuit is blown, consult your authorized dealer.
Why does my john deer LA115 engine backfires?
Your John Deer Tractor engine might backfire due to a faulty spark plug, so replace it. Also, ensure the operator is seated, as raising off the seat can cause backfiring.
Why john deer LA115 Tractor engine stops on hillsides?
If your John Deer Tractor engine stops or misses when operating on hillsides, it could be because the fuel tank is less than half full, so keep it at least half full. It can also happen if the operator is raising off of the seat, so ensure the operator is seated.
What to do if john deer LA115 Tractor engine vapor locks?
If your John Deer Tractor engine vapor locks, the fuel tank vent may be plugged, so clear it. Dirt in the fuel filter, plugged cooling fins, or a loose hose connection at the fuel filter or fuel pump can also cause this issue. Clean or replace the fuel filter, clean the cooling fins, and tighten loose hose connections.
Why does john deer LA115 engine knock?
A knocking sound in your John Deer Tractor engine can be due to stale or low octane fuel, in which case you should use fresh, high-octane fuel. It could also be caused by an overloaded engine, so reduce the engine load. Low engine speed or a low oil level can also cause knocking, so increase the engine speed and check and adjust the oil level.
Why john deer LA115 Tractor battery will not charge?
If your John Deer Tractor battery won't charge, it could be due to a dead cell in the battery, in which case you should replace the battery. Dirty battery cables and terminals can also prevent charging, so clean them. Low engine speed or excessive idling can also affect battery charging, so increase the engine speed.
General| Engine Power | 19 hp |
|---|---|
| Transmission | Hydrostatic |
| Cylinders | 1 |
| Drive | 2WD |
| Blades | 2 |
| Fuel Type | Gasoline |
| Cutting Width | 42 in |
| Wheelbase | 48.9 in |
| Turning Radius | 18 in. (45.7 cm) |
Learn how to use this operator's manual for safe and effective machine operation.
Understand safety symbols and messages for hazard and damage prevention.
Record essential machine and engine identification numbers for service and warranty.
Register your John Deere product online to ensure post-sales service and important information.
Learn the meaning of DANGER, WARNING, and CAUTION symbols and text on your machine.
Essential safety instructions for operating the cutting machine to prevent injury or death.
Step-by-step guide for safely parking the machine on level surfaces.
Safety precautions for operating on slopes to prevent loss-of-control and tip-overs.
Guidelines for safely maintaining the machine, including checks and repairs.
Warnings and precautions for handling high-pressure hydraulic fluids to prevent injury.
Safety measures to prevent fires caused by debris, heat, or improper storage.
Critical safety procedures for handling flammable fuel to prevent injury and fire.
Step-by-step instructions for safely charging and connecting the machine's battery.
Perform safety system checks to ensure proper functioning of interlock circuits.
Identifies and explains the controls located at the operator's station for LA105 models.
Identifies and explains the controls located at the operator's station for LA115, LA125, LA135 models.
Identifies and explains the controls located at the operator's station for LA145, LA155, LA165, LA175 models.
A checklist of essential tasks before operating the machine.
Instructions for setting the mower deck cutting height for optimal lawn care.
Procedure to adjust the mower deck for a level cut and optimal performance.
Procedures to test safety systems like park brake and seat switch for proper function.
Step-by-step guide for safely starting the engine under various conditions.
Recommended procedure for safely stopping the engine to prevent damage or hazards.
Instructions for engaging and disengaging the mower blades for operation.
How to engage and disengage cruise control for maintaining travel speed.
Procedure for safely moving the machine by hand when the engine is off.
Guidelines for using weights to improve stability during operation on slopes or with attachments.
Information on different mower blade types and their optimal uses.
General guidelines and timetables for routine machine maintenance.
Instructions for lubricating the front axle, wheel spindles, and pivot points.
Procedure to check the engine oil level to prevent serious engine problems.
Step-by-step guide for changing the engine oil and filter for optimal engine health.
Instructions for cleaning air intake screens and engine fins to prevent overheating.
Procedures for checking and cleaning air cleaner elements for specific models.
Procedures for checking and cleaning air cleaner elements for LA125 models.
Procedures for checking and cleaning air cleaner elements for specific models.
Information on checking the sealed transmission component for any issues.
Instructions for removing and installing the mower drive belt on specific deck sizes.
Step-by-step guide for safely removing the mower deck from the machine.
Step-by-step guide for safely installing the mower deck onto the machine.
Instructions for replacing the mower drive belt on 107 cm (42 in.) decks.
Procedure for adjusting spindle brakes on 107 cm (42 in.) mower decks.
How to check mower blades for damage or bending.
General guidelines for servicing mower blades, including removal and installation.
Procedure to check and balance mower blades for proper operation.
Safety precautions for servicing the battery, including handling hazards.
Step-by-step instructions for safely removing and installing the battery.
Guidelines on selecting and using the correct fuel for optimal engine performance.
Safe procedures for filling the fuel tank to prevent hazards and fuel contamination.
Proper methods for cleaning and maintaining plastic surfaces to avoid damage.
Instructions for safely removing and installing the machine's hood.
How to check and maintain correct tire pressure for safe operation.
Steps for safely removing and installing the front wheel assembly.
Common engine problems and their potential causes and checks.
Common electrical issues and their potential causes and checks.
Common tractor performance issues and their potential causes and checks.
Common mower performance issues and their potential causes and checks.
Safety precautions to take when storing the machine to prevent hazards.
Steps to prepare the machine for storage, including cleaning and repairs.
Procedures for preparing the fuel and engine for long-term storage.
Technical specifications related to the engine, including clearances and torque.
Detailed technical specifications for the LA105 Gear model.
Detailed technical specifications for the Automatic LA115 model.
Physical dimensions of the machine, including height, length, and width.
Specifications for tire sizes and pressure for various models.
Specifications for the 107 cm (42 in.) mower deck.
Information on the product warranty, coverage, and responsibilities.
Outlines the owner's responsibilities for maintaining warranty coverage.
Lists parts covered under the emissions control system warranty.
Information on obtaining John Deere quality parts and lubricants from dealers.
Instructions on how to order service parts online through the JDParts website.
A list of part numbers for common replacement items like filters and belts.
A log to record service dates for oil changes, filter replacements, and other maintenance.
To Next Page
