To assemble as a toddler bed, begin by separating the lower panel and feet from the ends (part A).
Insert eight barrel nuts (fixing 3) into the holes at each corner of the base (part C). If necessary, use a
flat-headed screwdriver to ensure that the slots point towards the holes in the ends. Attach the ends
(part A) using eight 70mm bolts (fixing 2). Taking care to push adjoining panels together, fully tighten
all bolts.
Toddler bed assembly
Fixing 2
Part C
Fixing 3
Separate the ends
6
Part A
To Next Page
Loading...
