This document is an instruction manual for the Boris toddler bed, manufactured by John Lewis. The manual provides comprehensive guidance on the assembly, safe use, and maintenance of the bed, ensuring its satisfactory operation and the safety of the child using it.
Function Description:
The Boris toddler bed is designed for children aged 18 months to 4 years. It serves as a safe and comfortable sleeping solution for toddlers transitioning from a cot. The bed features a sturdy wooden frame, a slatted base for mattress support, and side rails to prevent the child from falling out. Its design prioritizes safety and durability, complying with British Standard BS 8509:2008. The bed is intended for indoor use within a child's bedroom environment.
Important Technical Specifications:
- Recommended Mattress Size: 70 x 140cm.
- Mattress Fit: The mattress should be no more than 30mm shorter or narrower than the internal length or width of the bed to ensure a snug and safe fit.
- Age Range: Suitable for children from 18 months to 4 years.
- Compliance: Complies with BS 8509:2008, a British Standard for children's beds.
- Materials: The bed frame appears to be constructed from wood, as indicated by the assembly instructions and illustrations. The fixings include long bolts, short bolts, barrel nuts, wooden dowels, and base screws, suggesting a robust assembly.
- Dimensions (assembled): While specific external dimensions are not provided, the recommended mattress size gives an indication of the internal sleeping area.
- Fixings:
- Long bolt (x4)
- Short bolt (x6)
- Barrel nut (x4)
- Wooden dowel (x8)
- Base screw (x8)
- Parts:
- Headboard (x1)
- Footboard (x1)
- Base slats (x1 set)
- Side rail (x2)
- Base side (x2)
- Tools Required for Assembly (supplied/user-provided):
- 1 x 6mm Allen Key (supplied)
- Flat-headed screwdriver (user-provided)
- Cross-headed screwdriver (user-provided)
Usage Features:
- Assembly: The bed requires self-assembly, with clear, step-by-step instructions provided in the manual. The process involves attaching the headboard and footboard to the base sides, inserting barrel nuts and wooden dowels, securing the base slats, and finally fitting the side rails. The manual emphasizes not fully tightening bolts until instructed and ensuring all fixings are properly tightened before use.
- Safety Warnings:
- Choking Hazard: Small parts are included in the packaging, posing a choking hazard to children during assembly. Children should be kept clear during this process.
- Placement: The bed should not be placed near heat sources, windows, or other furniture that could pose a hazard. It should be placed either tight against a wall or with a minimum gap of 300mm between the wall and the bed to prevent suffocation.
- Condition: Do not use the bed if any part is broken, torn, or missing.
- Jumping: Children should not be allowed to jump on the bed, as this can cause damage to the furniture and/or injury to the child.
- Slats: Once the bed base has been assembled, the slats should not be removed.
- Assembly Competence: Furniture can be dangerous if incorrectly installed; assembly should be carried out by a competent person.
- Stability: All assembly fixings should always be tightened properly. Periodic checks of all fixings are recommended to ensure none have come loose and to prevent clothing or body parts from becoming snagged or trapped.
Maintenance Features:
- Cleaning: The furniture can be cleaned by wiping it with a damp cloth and then drying it with a soft, clean cloth.
- Prohibited Cleaning Agents: Do not use abrasives, bleach, alcohol, or ammonia-based household polishes, as these can damage the finish.
- Handling: Care should be taken when handling or moving the furniture to prevent damage. Careless handling may cause scratches, dents, or structural damage.
- Fixing Checks: Periodically check all assembly fixings to ensure they remain tight and secure. This is crucial for maintaining the bed's structural integrity and ensuring the child's safety.
- Future Reference: The manual explicitly states "IMPORTANT! KEEP FOR FUTURE REFERENCE," indicating that the information regarding assembly, safety, and maintenance is vital for the lifetime of the product.
The manual is clearly laid out with illustrations for each assembly step and a checklist of parts and fixings, making the assembly process as straightforward as possible for the user. It also provides contact information for John Lewis for queries or replacement parts.
Need help?
General
To Next Page
