John Lewis alex - Hardware Components

Important
Retain for future reference: Read carefully
Please read the instructions and warnings carefully before use to ensure safe and
satisfactory operation of this product.
Your child’s safety is your responsibility. If you have a query with this product or require
replacement parts, please contact your nearest John Lewis department store.
Lay out the parts on a soft level surface and compare to the part/fixing checklist on pages 2
and 3. Do not discard any packaging until you are sure that you have all the parts.
Keep children clear during assembly as pack contains small parts which may present a
choking hazard.
Recommended changing mat: 750 x 470 mm.
This product complies with BSEN 12221:2008 +A1:2013.
You will need the following tools to complete assembly:
Flat-headed screwdriver and Cross point screwdriver.
2
Hardware
A x 6 (30mm)
B x 6
C x 2
D x 20 (30mm)
E x 14
F x 12 (35mm)
H x 2 (45mm)
G x 24
K x 12
J x 12 (25mm)
Hexagon Key x 1