Need help?Do you have a question about the John Lewis ANNA TODDLER BED and is the answer not in the manual?
General| Type | Toddler Bed |
|---|---|
| Brand | John Lewis |
| Model Name | Anna |
| Assembly Required | Yes |
| Mattress Size | 70 x 140 cm |
| Color | White |
| Weight Capacity | 50kg |
| Material | Solid Pine |
Check all parts against the list, retain packaging until sure, and have a second adult assist with assembly.
Ensure safe mattress size, avoid uneven surfaces, heat, and hazards. Prevent strangulation risks and keep cords away from windows.
Regularly check components are secure, store in a dry place, use only supplied parts, and ensure proper use.
Lists all required parts for the toddler bed assembly, including bed ends, rails, sides, bolts, and an Allen key.
Connect the two short bed sides to the long side rails using 55mm bolts and cross dowels.
Secure the high bed end to the sides with 55mm bolts at the top and 70mm bolts at the bottom, using cross dowels.
Connect the low bed end to the sides using 70mm bolts and dowels as illustrated.
Fix the mattress base using the remaining 40mm bolts, with four bolts attached to each side.
Contact your nearest John Lewis store for any product problems or to request replacement parts.
To Next Page