John Lewis ANNA - Page 2

2
Parts
Parts
T
hank you for purchasing this
Anna cot
.
Please read the instructions and warnings
carefully before use to ensure safe and satisfactory operation of this product.
Your child’s safety is your responsibility. If you have a query with this product or require
replacement parts, please contact your nearest John Lewis department store.
Lay out the parts on a soft level surface and compare to the part/fixings checklist on
page 2. Do not discard any packaging until you are sure that you have all the parts.
Ensure that your child is kept clear during assembly due to small parts.
Recommended mattress: 60 x 120cm
This product complies with BS EN 716 - 1 & 2: 1996
Fixings
You will need:
1 x Cross-headed screwdriver
1 x Flat-headed screwdriver
1 x Allen key (supplied)
1
35mm bolt x 2
3
55mm bolt x 4
2
45mm bolt x 4
4
70mm bolt x 2
6
Sleeve nut x 2
5
Assembly dowel x 4
7
Rubber stopper x 2
8
Barrel nut x 2
E
Foot pedal x 1
A
Cot end x 2
C
Drop side x 1
B
Fixed side x 1
D
Mattress base x 1