To Next PageTo Next PageWhat to do if John Lewis Washer does not empty and/or does not spin?
If your John Lewis Washer isn't emptying or spinning, check the drain hose for any kinks or squashes (error code E20). Also, the drain pump may be blocked (error code E20), so try cleaning it. Make sure that you have deselected the “rinse hold” and “None” options. Ensure the drainage system pipes aren't blocked and that the “Soak” program isn't selected.
What to do if John Lewis JLBIWM 1402 Washer does not fill?
If your John Lewis Washer isn't filling, the water tap might be closed (error code E10), so open it. The filter in the inlet hose could be blocked (error code E10), so clean it. The inlet hose may be squashed or kinked (error code E10), so check it. Also, ensure the door is properly closed (error code E40).
Why John Lewis Washer won't start?
Your John Lewis Washer might not start due to several reasons: the door may not be properly closed (error code E40), the plug might not be correctly inserted into the power socket, there might be no power supply at the socket, the main fuse or the fuse in the plug could be blown, you may have forgotten to press the «Start/Pause» button, the «Delay start» option might be selected, or the «Child lock» option could be enabled. Check these to resolve the issue.
Why is there water on the floor from my John Lewis JLBIWM 1402?
If you find water on the floor near your John Lewis Washer, it could be due to using too much or unsuitable detergent. Inspect the inlet hose fittings for leaks. Also, check if the inlet or drain hose is damaged or not securely positioned. Finally, make sure the cap on the emergency emptying hose has been replaced correctly after cleaning the filter.
Why John Lewis JLBIWM 1402 fills then empties immediately?
If your John Lewis Washer fills and then empties immediately, check if the end of the drain hose is too low, submerged in water, or lacks a vent.
How to improve unsatisfactory washing results with John Lewis JLBIWM 1402 Washer?
To improve unsatisfactory washing results with your John Lewis Washer, try using more or a more suitable detergent. Treat stubborn stains before washing. Ensure you're selecting the correct wash program and temperature. Also, avoid overloading the drum with too much laundry.
General| Brand | John Lewis |
|---|---|
| Model | JLBIWM 1402 |
| Category | Washer |
| Language | English |
Safety precautions during appliance installation.
Guidelines for keeping children safe around the washing machine.
General safety advice for operating the washing machine.
How to select wash programmes and temperatures.
How to start, pause, and resume programmes.
How to set a delayed start for programmes.
How to choose wash settings.
Solutions for when the machine fails to start.
Solutions for water filling problems.
Troubleshooting for immediate draining after filling.
Solutions for draining or spinning failures.
Identifying and fixing leaks.
Causes and solutions for poor wash performance.
Troubleshooting display and indicator issues.
Solutions for excessive vibration during spin cycles.
Reasons why the door remains locked.
Troubleshooting spin cycle delays or failures.
Explaining normal and abnormal machine sounds.
Steps for fitting the furniture door to the appliance.
Details on using authorized parts and service.
