John Lewis JLWM 1203 User Manual (English)

Questions and Answers:

O
ogibsonJul 28, 2025
Why is my John Lewis JLWM 1203 not emptying or spinning?
- O
  Omar ChoiJul 28, 2025
  If your John Lewis Washer isn't emptying and/or spinning, consider the following: * Inspect the drain hose for any kinks or squashes and straighten it out. The E20 error code indicates a possible issue with the drain hose. * Disable the “rinse hold” option. * Check the drain pump for blockages and clean it if necessary. The E20 error code indicates a possible issue with the drain pump. * Select the appropriate program for your load. * Clear any obstructions in the drainage system pipes. * Avoid using the “Soak” program.
J
Jillian StephensonAug 1, 2025
How to improve washing results with my John Lewis Washer?
- C
  Catherine WilliamsAug 2, 2025
  If you're getting unsatisfactory washing results from your John Lewis Washer, consider these points: * Make sure you're using the correct amount of a suitable detergent. * Pre-treat any stubborn stains before washing. * Select the appropriate wash program and temperature for your load. * Avoid overloading the drum.
D
David BennettAug 6, 2025
How to fix a John Lewis JLWM 1203 that won't start?
- D
  David MunozAug 6, 2025
  If your John Lewis Washer isn't starting, here are a few things to check: * Ensure the door is fully closed; the E40 error code indicates the door might be open. * Make sure the plug is correctly inserted into the power socket. * Verify that there is power supply at the socket. * Check and replace the main fuse or the fuse in the plug if it's blown. * Press the «Start/Pause» button. * Deactivate the «Delay start» option. * Deactivate the «Child lock» option.
V
vmasseyAug 10, 2025
What to do if my John Lewis Washer is not filling with water?
- D
  Destiny CrossAug 10, 2025
  If your John Lewis Washer isn't filling with water, here are some things to check: * Ensure that the water tap is fully open. The E10 error code indicates a possible issue. * Inspect the filter in the inlet hose for blockages and clean it if necessary. * Check the inlet hose for any kinks or squashes and straighten it out. * Make sure the door is completely closed. The E40 error code indicates the door might be open.
E
ericleAug 14, 2025
What to do if John Lewis JLWM 1203 Washer fills then empties right away?
- M
  Mikayla PowellAug 14, 2025
  If your John Lewis Washer fills with water and then empties immediately, check the following: * Make sure the end of the drain hose isn't positioned too low. * Ensure the end of the drain hose isn't submerged in water. * Confirm there is a vent in the end of the drain hose.
S
Sean KingAug 18, 2025
Why is my John Lewis JLWM 1203 Washer leaking water on the floor?
- J
  Jonathan HooverAug 18, 2025
  If there's water on the floor near your John Lewis Washer, take these steps: * Ensure you are using the correct amount and type of detergent. * Inspect the inlet hose fittings for any leaks. * Make sure the drain hose is not damaged and is securely positioned. * After cleaning the filter, ensure the cap on the emergency emptying hose is replaced.
M
Mary CooperAug 23, 2025
What does it mean when the Start/Pause light flashes on my John Lewis JLWM 1203?
- B
  brownalanAug 23, 2025
  If the green Start/Pause light is flashing and the display seems off on your John Lewis Washer, press the Start/Pause button to turn the appliance on.

John Lewis JLWM 1203 Specifications

General

Brand	John Lewis
Model	JLWM 1203
Category	Washer
Language	English

Summary

Safety Information

General Safety

Covers critical safety points like avoiding modifications, hot door glass, and keeping children away from the appliance.

Child Safety

Measures to ensure the safe use of the appliance around children, including drum access prevention.

Installation

Handling and Transit Bolts

Guidance on moving the heavy appliance and removing transit bolts before operation.

Plumbing and Electrical Requirements

Details plumbing and electrical connection requirements for safe and proper installation.

Appliance Use

Fabric Care and Loading

Advice on washing different fabrics, avoiding overloading, and preparing laundry.

Daily Operations

Routine operations for using the washing machine day-to-day, including loading and detergent.

Programme Selection and Options

How to choose wash programmes, adjust spin speed, and select additional features.

Starting and Managing Cycles

How to start, pause, restart, and modify programmes during operation.

End of Programme Procedures

What happens when a wash cycle is complete and how to proceed.

Product Description

Appliance Components Overview

Identifies key parts of the washing machine with numbered labels for clarity.

Detergent Dispenser Drawer

Explains the compartments for detergent and additives and their usage.

Control Panel

Programme Dial and Spin Functions

Explains the programme selector dial and the spin speed button functionality.

Prewash and Rinse Hold Options

Details the prewash cycle and the rinse hold function for improved washing.

Intensive, Extra Rinse, and Quick Functions

Describes intensive wash, extra rinse, and quick wash options for specific needs.

Start/Pause, Door Lock, and Delay Start

Explains how to start, pause, lock the door, and delay the program.

Display Information and Symbols

Describes the information shown on the display, including child lock and time.

First Use

Initial Setup and Cleaning Cycle

Steps for the first use, including initial cleaning and setup of the appliance.

Personalisation

Acoustic Signals and Child Lock

How to manage sound alerts and activate/deactivate the child lock feature.

Helpful Hints and Tips

Laundry Sorting and Stain Removal

Guidance on sorting clothes and effective stain treatment methods.

Detergent, Additives, and Water Hardness

Information on choosing detergents, additives, and considering water hardness.

Washing Programmes

Cottons Programme Details

Specifics for cotton wash cycles at various temperatures and soil levels.

Synthetics, Delicates, and Wool Programmes

Instructions for washing synthetic, mixed, delicate, and woollen fabrics.

Soak, Rinse, and Drain Functions

Details on soak, rinse, and drain programmes for specific washing needs.

Spin and Quick Wash Programmes

Information on spin-only cycles and a short quick wash option for lightly soiled items.

Technical Data

Care and Cleaning

Descaling and Exterior Cleaning

Procedures for descaling the machine and cleaning its exterior surfaces.

Post-Wash and Maintenance Care

Tips for daily care after washes and periodic maintenance washes.

Cleaning the Dispenser Drawer and Recess

How to clean the detergent drawer and the internal recess area.

Washing Drum and Door Seal Care

Guidance on cleaning the drum and inspecting the door seal for debris.

Drain Pump Inspection and Cleaning

Procedure for inspecting and cleaning the drain pump to ensure proper function.

Pump Filter and Impeller Maintenance

Steps for removing, cleaning, and reassembling the pump filter and impeller.

Water Inlet Filter Cleaning

How to clean inlet filters if the machine fails to fill properly.

Emergency Emptying Out

Manual Draining Steps and Post-Drain Care

Detailed steps for emergency draining and necessary subsequent actions.

Frost Precaution

Installation Process

Unpacking and Transit Bolt Removal

Instructions for unpacking and removing transit bolts from the appliance.

Positioning and Levelling the Machine

Advice on placing and levelling the machine on a suitable surface for stability.

Plumbing and Drainage Connections

Guidance on connecting the water supply and drainage systems correctly.

Water Inlet Hose Connection

How to correctly connect the water inlet hose to the tap.

Water Drainage System Setup

Methods for connecting the drain hose to the household drainage system.

Drainage into Standpipe or Sink Spigot

Instructions for connecting the drain hose to a standpipe or sink outlet.

Pipework Preparation and Accessibility

Preparing pipework and ensuring appliance accessibility for service.

Environmental Considerations

Electrical Connection

Electrical Safety and Earthing Requirements

Essential warnings regarding electrical connection, earthing, and voltage checks.

Plug Wiring and Fuse Safety

Details on plug wiring, fuse replacement, and cable safety.

Troubleshooting: What to Do If...

Machine Not Starting and Error Codes

Addresses issues like the machine not starting and error codes E10, E20, E40.

Fill, Empty, and Spin Problems

Solutions for issues related to water filling, draining, and spinning.

Leaks, Foam, and Hose Issues

Troubleshooting water leaks, excessive foam, and hose connection problems.

Washing Quality and Door Opening Issues

Resolving problems with wash results and the door not opening.

Vibration, Noise, and Spinning Problems

Addressing machine vibration, unusual noise, and delayed spinning.

Repairs and After Sales Service

Warranty, Service Contacts, and Spare Parts

Details on warranty, how to contact service, and the importance of genuine spare parts.

Environment and Recycling

Product Disposal and Ecological Washing Tips

Advice on recycling the product and eco-friendly washing methods.

Related product manuals

John Lewis JLWM1402 1400

26 pages

John Lewis JLBIWM1403

44 pages

John Lewis JLBIWM 1402

28 pages

John Lewis JLWM 1203 User Manual

Table of Contents

Questions and Answers:

John Lewis JLWM 1203 Specifications

Summary

Safety Information

General Safety

Child Safety

Installation

Handling and Transit Bolts

Plumbing and Electrical Requirements

Appliance Use

Fabric Care and Loading

Daily Operations

Programme Selection and Options

Starting and Managing Cycles

End of Programme Procedures

Product Description

Appliance Components Overview

Detergent Dispenser Drawer

Control Panel

Programme Dial and Spin Functions

Prewash and Rinse Hold Options

Intensive, Extra Rinse, and Quick Functions

Start/Pause, Door Lock, and Delay Start

Display Information and Symbols

First Use

Initial Setup and Cleaning Cycle

Personalisation

Acoustic Signals and Child Lock

Helpful Hints and Tips

Laundry Sorting and Stain Removal

Detergent, Additives, and Water Hardness

Washing Programmes

Cottons Programme Details

Synthetics, Delicates, and Wool Programmes

Soak, Rinse, and Drain Functions

Spin and Quick Wash Programmes

Technical Data

Care and Cleaning

Descaling and Exterior Cleaning

Post-Wash and Maintenance Care

Cleaning the Dispenser Drawer and Recess

Washing Drum and Door Seal Care

Drain Pump Inspection and Cleaning

Pump Filter and Impeller Maintenance

Water Inlet Filter Cleaning

Emergency Emptying Out

Manual Draining Steps and Post-Drain Care

Frost Precaution

Installation Process

Unpacking and Transit Bolt Removal

Positioning and Levelling the Machine

Plumbing and Drainage Connections

Water Inlet Hose Connection

Water Drainage System Setup

Drainage into Standpipe or Sink Spigot

Pipework Preparation and Accessibility

Environmental Considerations

Electrical Connection

Electrical Safety and Earthing Requirements

Plug Wiring and Fuse Safety

Troubleshooting: What to Do If...

Machine Not Starting and Error Codes

Fill, Empty, and Spin Problems

Leaks, Foam, and Hose Issues

Washing Quality and Door Opening Issues

Vibration, Noise, and Spinning Problems

Repairs and After Sales Service

Warranty, Service Contacts, and Spare Parts

Environment and Recycling

Product Disposal and Ecological Washing Tips

Related product manuals