Why is my John Lewis JLWD 1613 Washer/Dryer not filling with water properly?
- MMatthew DouglasAug 1, 2025
If your John Lewis Washer/Dryer isn't filling with water properly, try the following: * Make sure the water tap is fully open. * Check that your water supply pressure isn't too low (contact your local water authority for information on this). * Ensure the water tap isn't clogged. * Inspect the inlet hose filter and valve filter for clogs; refer to 'Care and cleaning' for instructions. * Make sure the inlet hose isn't kinked or bent. * Confirm the water inlet hose is correctly connected.