What to do if John Lewis Octave cannot connect to the internet?
If your John Lewis Radio cannot connect to the internet, there are a couple of things to check. First, ensure that your internet connection is active by testing it with another device on the same network. Additionally, a firewall might be blocking access. Verify that the following ports are open: TCP ports 80 and 123; UDP port 53.
How to fix hissing on FM or burbling on DAB on John Lewis Octave Radio?
If your John Lewis Radio is experiencing hissing on FM or burbling/intermittent cut-out on DAB, the issue is likely due to low signal strength. To resolve this, check local digital radio stations and verify local signal strength.
What to do if DAB on John Lewis Radio says ‘No station available’?
If your John Lewis Radio displays a ‘No station available’ message on DAB, it is likely due to low signal strength. Since a station exists, try rescanning to resolve this issue.
How to fix John Lewis Octave Radio when it cannot connect to the network?
If your John Lewis Radio cannot connect to the network, it might be due to several reasons. First, verify that your network is functioning correctly between the router and the appliance. If the signal strength is insufficient, try moving the radio closer to the router to improve connectivity. Also, the encryption method used by your router might not be compatible; Octave supports WEP and WPA2, so consider changing the encryption method on your router. Finally, if you have an unusual network configuration, set up the connection manually through Menu settings > Network > Manual.
Why John Lewis Octave Radio cannot play particular Internet radio station?
If your John Lewis Radio cannot play a specific internet radio station, it could be because the station is either not broadcasting or is currently overloaded. To check, try listening to the station via its internet radio website. If that doesn't work, try again later.
General| Brand | John Lewis |
|---|---|
| Model | Octave |
| Category | Radio |
| Language | English |
Basic steps to place, connect power, and turn on the Octave radio.
Procedures for scanning stations, performing a full scan, and pruning unavailable stations.
How to store and recall DAB radio stations using preset buttons and menus.
Methods for scanning and manually tuning FM radio stations for optimal reception.
Instructions for saving and retrieving favorite FM stations using preset functions.
How to pair a Bluetooth device and play music wirelessly through the radio.
Steps to connect and play audio from external devices via the AUX-IN socket.
How to select stations, store and recall presets for internet radio.
Accessing and playing audio files from UPnP media servers on your network.
Using Windows 7 'Play To' feature to stream media to the Octave radio.
Instructions for setting up and configuring two independent alarms with various modes and presets.
How to use the snooze feature to temporarily silence a sounding alarm.
To Next Page
