2
A
Cot end x 2
B
Headboard x 1
C
Footboard x 1
E
Base x 1
Thank you for purchasing this Rachel cotbed/toddler bed. Please read the instructions and warnings
carefully before use to ensure safe and satisfactory operation of this product.
Your child’s safety is your responsibility. If you have a query with this product or require replacement
parts, please contact your nearest John Lewis department store.
Lay out the parts on a soft level surface and compare to the part/fixings checklist on page 2. Do not
discard any packaging until you are sure that you have all the parts.
Keep children clear during assembly as pack contains small parts which may present a choking hazard.
Recommended mattress: 70 x 140cm
This product complies with BS EN 716 - 1: 2008 and BS 8509: 2008 + A1: 2011
You will need:
1 x 4
mm Allen Key (supplied)
Flat-headed screwdriver
Fixings
1
65mm bolt x 12
Parts
D
Cot side x 2
2
3
18mm Barrel nut x 8
13mm Barrel nut x 4
To Next Page
Loading...
