John Shearer CONNOR SHEA 8000PB

Need help?

Do you have a question about the John Shearer CONNOR SHEA 8000PB and is the answer not in the manual?

Summary

Warranty Policy

Pre-Delivery Check

Suggested Owners Service Parts

Introduction

Ordering Service Parts

Guidance on how to order replacement parts for the machine.

Accepting Delivery

Standard Machine Specifications

Technical details and dimensions for various models of the Series 8000 Pasture Drill.

Safety First

Assembly Instructions

Operating Instructions

Setting the Coulters

Procedure for adjusting the coulter depth and angle for optimal performance.

Drives

Details on checking and adjusting the drive mechanisms for proper function.

Calibration

Seeding Rate Check

Method for verifying and adjusting the machine's seed dispensing rate.

Gate Setting

Instructions for adjusting the gates on the metering rollers for different seeds and fertilizers.

Sowing Chart

Cleaning

Fertilizer Corrosion Damage

Information on preventing corrosion, especially in the hopper, from fertilizer residue.

Service Points

Key points to check for regular maintenance and upkeep of the machine.

Tyre Pressures

Lubrication Points

Details on all lubrication points, frequency, and recommended lubricants.

Paint

Information on touch-up paints for maintenance and corrosion protection.

Service History

Notes

A section for recording service details and observations.

Illustrated Parts Section

Mainframe and Axle

Hydraulic Coulter Bar and Mainframe

Hitch and Optional Drawbar

Drive Wheel and Pressure Arm

Drive Controls and Torque Limiters

Roller Clutch Box

Distribution Mechanism

Coil Tyne Assembly

Coulter Assembly

Machine Identification

Seeder Cup Position

Optional Parts Section

Hydraulic Coulter Bar - Add On Kit