REV 1/30/18
151 Snyder Ave. Barberton, OH 44203
For Service Assistance • Phone Toll Free 1-800-433-0708
OPERATOR’S MANUAL JDI-LP5
Operation:
To Fill:
1
. Roll the drain under the vehicle to be serviced and drain the fluid into the drain.
To Empty:
1. Position the drain next to the used oil storage receptacle.
2. Attach the 10’ evacuation hose to the pump outlet side quick connect coupler. Make sure connection is secure.
3. Place the other end of the evacuation hose securely into the used oil receptacle.
4. Plug the electric pump into a 120V outlet. The pump will self prime and start to pump.
5. Monitor the level in the drain and unplug the pump when the drain is evacuated
.
6. When finished, disconnect the evacuation hose and position the end onto the cradle. Wrap the electrical cord onto the storage cleat.
To Next Page
Need help?
General
