What to do if Johnson & Johnson ASP STERRAD NX Medical Equipment displays H2O2 curve area too low?
If your Johnson & Johnson Medical Equipment displays that the H2O2 curve area is too low, it means the calculated area under the time-temperature curve is less than the threshold value set in the CCF. Run diagnostics and contact your ASP Customer Care Representative.
What does system problem call ASP mean for Johnson & Johnson ASP STERRAD NX Medical Equipment?
If your Johnson & Johnson Medical Equipment displays 'System Problem - Call ASP!', it means a system error has occurred. Call your ASP Customer Care Representative.
What to do if Johnson & Johnson ASP STERRAD NX Medical Equipment shows memory card full?
If your Johnson & Johnson Medical Equipment indicates that the memory card is full, it means the PCMCIA card contains more than 50 cycle records. The next cycle record will overwrite the oldest one. To resolve this, store cycle record information from the PCMCIA card on an external PC.
What to do if Johnson & Johnson ASP STERRAD NX shows collection box failure full?
If your Johnson & Johnson Medical Equipment displays a collection box failure indicating it's full, this means the collection box is either not present or not properly positioned. Check the collection box to ensure it is present and correctly positioned. If the problem continues, contact your ASP Customer Care Representative.
What to do if Johnson & Johnson ASP STERRAD NX displays collection box failure not full?
If your Johnson & Johnson Medical Equipment displays a collection box failure indicating it's not full, it means the disposed cassette did not end up in the collection box. To fix this, wear gloves, open the collection box drawer, and free up any jammed cassettes. If the problem persists, contact your ASP Customer Care Representative.
What to do if Johnson & Johnson Medical Equipment shows cassette system timeout on indexing?
If your Johnson & Johnson Medical Equipment displays a cassette system timeout on indexing, run diagnostics.
What to do if Johnson & Johnson ASP STERRAD NX cassette did not index?
If the cassette did not index on your Johnson & Johnson Medical Equipment, run diagnostics.
What to do if Johnson & Johnson ASP STERRAD NX shows cassette system timeout?
If your Johnson & Johnson Medical Equipment displays a cassette system timeout, run diagnostics.
What does it mean if Johnson & Johnson ASP STERRAD NX Medical Equipment says please insert new cassette?
If your Johnson & Johnson Medical Equipment prompts you to insert a new cassette, it means no cassette was detected. Insert a valid cassette to resolve this.
What to do if Johnson & Johnson ASP STERRAD NX Medical Equipment shows power supply out of range?
If your Johnson & Johnson Medical Equipment shows a power supply out of range, it means a power supply voltage is 20% higher or lower than specified. Run diagnostics.
Guide on navigating and using the user's manual effectively.
Contact information for support and troubleshooting assistance.
Essential safety precautions and first aid measures for handling the sterilizer and its chemicals.
Details required personal protective equipment (PPE) for safe operation of the sterilizer.
Precautions to prevent damage to the sterilizer and medical instruments during use.
Explains the meaning and importance of warning, caution, and note indicators in the guide.
Defines the purpose and applications of the STERRAD NX Sterilization System.
Explains the core technology and chemical process of STERRAD NX sterilization.
Describes the distinct phases and steps involved in a typical STERRAD NX sterilization cycle.
Identifies and briefly describes the main components and features of the STERRAD NX sterilizer.
Specifies the types of medical devices and conditions suitable for STERRAD NX sterilization.
Lists materials and instruments that are not compatible with or safe for STERRAD NX sterilization.
Outlines critical cleaning, rinsing, and drying procedures for instruments before sterilization.
Provides instructions on proper packaging methods and safe loading of instruments into the sterilizer.
Essential pre-operation checks and operator responsibilities before using the sterilizer.
Step-by-step guide to powering on the sterilizer and initiating the warm-up sequence.
Detailed procedure for correctly installing a new STERRAD NX sterilization cassette.
Guidance on preparing the instruments and verifying conditions before starting the sterilization cycle.
Process for operator authentication required before operating the sterilizer.
Instructions for safely placing sterilized items into the chamber, avoiding contact with critical components.
How to choose the correct sterilization cycle and initiate the process.
Procedures for safely interrupting and aborting an active sterilization cycle.
Information on the screen display and audio cues indicating successful cycle completion.
Steps for safely removing and handling sterilized instruments from the chamber.
How to interpret chemical indicator results to verify sterilization effectiveness.
Introduces supervisor-level access and its purpose in managing sterilizer functions.
Describes the different user roles and their associated privileges for operating the sterilizer.
Explains access to advanced functions like date/time settings and diagnostics.
Guide for configuring the sterilizer's internal clock and date format.
Options for customizing sterilizer settings, including alarms, language, and access control.
Procedures for managing user accounts, passwords, and access privileges.
How to run and interpret automated diagnostic tests to check sterilizer performance.
Overview of the types of reports (System Summary, Cycle History) that can be viewed.
Lists the sterilizer's configuration settings and operational parameters.
Details on accessing and reviewing records of past sterilization cycles.
Explains the short and long format reports generated after each sterilization cycle.
Describes maintenance tasks performed automatically by the sterilizer software.
Outlines user-performed maintenance tasks such as cleaning and replacing parts.
Instructions for safely removing and discarding used sterilization cassettes.
Step-by-step guide for replacing the printer's thermal paper roll.
Guidelines for cleaning the external surfaces of the STERRAD NX sterilizer.
Procedure for replacing the air filter when it becomes clogged with debris.
Instructions for managing and replacing the PCMCIA card used for data storage.
Information and regulatory considerations for the safe disposal of the STERRAD NX sterilizer.
Lists common error messages, their causes, and suggested remedies for operator intervention.
Explains diagnostic messages and identifies conditions that may require professional service.
Details the terms and conditions of the commercial warranty for the STERRAD sterilizer.
Outlines the licensing terms for the STERRAD Operational Software.
Lists consumable items required for the STERRAD NX sterilizer, including product codes.
Lists optional accessories available for the STERRAD NX sterilizer with product codes.
Lists essential additional parts for the sterilizer, including part numbers.
Specifies the electrical power requirements for the STERRAD NX sterilizer.
Provides the physical dimensions and footprint specifications for the STERRAD NX sterilizer.
Details the recommended clearances around the sterilizer for safe operation and maintenance.
Lists the operating and storage temperature ranges for the STERRAD NX sterilizer.
Specifies the environmental humidity requirements for operating and storing the sterilizer.
Indicates the approximate duration of standard and advanced sterilization cycles.
Lists the types of connectors available on the STERRAD NX sterilizer for peripherals.
General| Brand | Johnson & Johnson |
|---|---|
| Model | ASP STERRAD NX |
| Category | Medical Equipment |
| Language | English |
To Next Page