ZFR1810 Wireless Field Bus Coordinator Installation Instructions10
Accessories
Technical Specifications
Table 4: Accessories (Order Separately)
Product Code
Number
Product Description
TP-2420 Transformer, Wall Plug Mount, 120 VAC to 24 VAC, 20 VA, Class 2
WRZ-SST-120 Wireless Sensing System Tool. Requires WRZ Series Sensor to function as a site survey tool for
ZFR1800 Wireless Field Bus System, or for WRZ-7860-0 One-to-One Room Sensing System.
Y65T31-0
1
Transformer, 120/208/240 VAC to 24 VAC, 40 VA, Class 2, Foot Mount, 20 cm (8 in.) Primary Leads
and Secondary Screw Terminals
ZFR-USBHA-0 USB Dongle with ZFR Driver provides a wireless connection through the CCT to allow wireless
commissioning of the wireless enabled FAC, FEC, IOM, and VMA16 controllers. The USB ZFR Dongle
is also used with the ZFR Checkout Tool used to troubleshoot and validate ZFR wireless meshes using
a laptop computer.
ZFR-1810ANT-700 Replacement antenna kit for ZFR1810 Wireless Field Bus Coordinator. Includes antenna, coaxial
cable, and mounting hardware.
1. Additional Y60 Series Transformers are available from Johnson Controls.
ZFR1810 Wireless Field Bus Coordinator (Part 1 of 2)
Product Code Number MS-ZFR1810-x
Power Supply Input One of the following:
• 24 VAC +10%/-15%, 50/60 Hz, Class 2. Transformer allowance should be 2.5 VA
maximum, 2 VA typical. Provided through the three-position 24 V~ screw terminal
pluggable block.
• 15 VDC, 180 mA (7 to 18 VDC, 185 mA maximum current draw) on the FC Bus
provided through the FC/SA BUS IN RJ-12 jack from the FC Bus Jack on a Field
Controller or NxE supervisory engine.
Power Supply Output 15 VDC; Provided through the FC/SA BUS, FC/SA BUS OUT RJ-12 jack for external
devices.
Addressing DIP Switches, Field Adjustable
Wireless Band Direct-Sequence Spread-Spectrum, 2.4 GHz ISM Bands
Transmission Power 10 mW Maximum
Transmission Range 76.2 m (250 ft) Maximum Line-of-Sight
15 m (50 ft) Recommended
Ambient Conditions Operating: 0 to 50°C (32 to 122°F), 5 to 95% RH, Noncondensing
Storage: -20 to 70°C (-4 to 158°F), 5 to 90% RH, Noncondensing
Materials White Plastic Housing with Plenum rating per UL1995 UL94-5VB Flammability Rating
Terminations Two spade terminals with three-position screw terminal pluggable block for 24 VAC power
supply input.
Four spade terminals with four-position screw terminal pluggable block for RS-485
communications.
RJ-12 IN jack for 15 VDC power supply and communications connection from an NxE or
FEC FC Bus jack.
RJ-12 OUT jack supplies 15 VDC and communications to BTCVT Wireless
Commissioning Converter.
Dimensions 146 x 122 x 52 mm (5.8 x 4.8 x 2.1 in.)
To Next Page
Loading...
Need help?
General
