Johnson Matthey TRACERCO T401 User Manual

5.11.2 Setting the Alarm Trip Level
The following flow chart identifies the process for setting an alarm trip level in cps and Bq / cm
2
mode.
Symbol
Sounder
Alarm
Off
Off
Off
Continuous
On
Off
Short Flash
Off
On
Long Flash
On
On
It should be noted that the Bq / cm
2
alarm will only be operative when the monitor is being
used with the Bq / cm
2
mode selected on the digital scale. Since only a single value trip setting
can be entered in Bq / cm
2
, the operator must ensure that the selected value is consistent with
the type of radionuclide being monitored.

Johnson Matthey TRACERCO T401 Specifications

General

Brand	Johnson Matthey
Model	TRACERCO T401
Category	Measuring Instruments
Language	English