MKA-21/RTA-17
QUICK RELEASE BRACKET
1854021 & 1854017
Item /
Assembly
Part # Description Qty.
2
2371965 PLATE-INNER PD/AP QCK REL. 1
2371966 PLATE-INNER PD/AP QRB BLK. 1
4
2371967 PLATE-OUTER PD/AP QCK REL. 1
2371968 PLATE-OUTER PD/AP QRB BLK.
6 2990906 HANDLE ASSY PD/AP QRB. 1
A
Includes 8-20
2994848 BAG ASSY PD/AP QRB 1
8 2372631 PIN-PADLOCK PD/AP QCK REL. 1
10 2260800 CLIP-HAIR SPRING,SS,MAX BG 1
12 2373480 SCREW-1/4-20 X 1 1/2 PFH SS 6
14 2371712 WASHER-FLAT 9/32 X 5/8 X 1/16 6
16 2373482 SCREW-1/4-20 X 3” PFH SS 4
18 2261713 WASHER-1/4 FLAT 18-8 SS 4
20 2073100 NUT-HEX 1/4-20 NYLOC-JAM SS 10
▲
2374917 INSTRUCTIONS PD/AP QRB 1
The MKA-21 is recommended for use with Minn Kota
®
Ulterra™, Terrova
®
, PowerDrive™, PowerDrive V2, and Pontoon PowerDrive™
freshwater trolling motors and the Deckhand 40. The RTA-17 is recommended for use with Minn Kota
®
RT Ulterra™, RT Terrova
®
, RT
PowerDrive™ and RT PowerDrive V2 saltwater trolling motors. Do not use with motors equipped with a shaft 72” or greater. Do not use with
112lb thrust motors.
NOTICE: Do not use with motors equipped with a shaft
72” or greater. Do not use with 112lb thrust motors.
NOTICE: It is recommended to have a second person
help with this installation.
✖ Not shown on Parts Diagram.
▲ This part is included in an assembly and cannot be ordered individually.
22
44
1212
1616
1414
1818
2020
AA
66
1010
88
TOOLS AND RESOURCES REQUIRED
• Drill
• Drill bit 17/64”
• #2 or #3 Philips Screwdriver
• Awl, pencil or similar marking tool
• Scissors
• A second person to help with
the installation
NOTICE: Images are a graphical representation and
may vary from your motor. Save the box! A template for
installation is printed on the inside of the box.
Complete Typical Complete Typical
InstallationInstallation
1 | minnkotamotors.com
©2021 Johnson Outdoors Marine Electronics, Inc.
To Next Page
Need help?
General