6
4. Mount the clutch on the pump shaft
with a key (pos 15).
5. Mount o-ring (F8B) and lip seal
(spring towards the impeller) alt
mechanical seal.
6. Mount the wear plate.
7. Fasten the cam, but before doing so
apply sealing compound to cam and
screw in order to prevent leakage.
ENGLISH
8. Lubricate the impeller with vaseline or
similar and fit it with a rotating move-
ment in the intended direction of
impeller rotation.
9. Fit the gasket alt. the o-ring before
mounting the endcover.
Type designation
Accessories
See page 20-21.
Pump with impeller neoprene and full cam
Pump type Part No Connection Seal
F7B-5001 10-24577-13 BSP 1" Lipseal
F7B-50017 10-24577-19 NPTF 1"-11
1
/2 Lipseal
F7B-5001 10-24577-99 BSP 1" Mechanical seal
F7B-50017 10-24577-98 NPTF 1"-11
1
/2 Mechanical seal
F8B-5001 10-13022-99 BSP 1
1
/2" Mechanical seal
F8B-50017 10-13022-98 NPTF 1
1
/2"-11
1
/2 Mechanical seal
F8B-50017 10-13022-96 NPTF 1
1
/2"-11
1
/2 Mechanical seal
F8B-50017 10-13022-95 NPTF 1
1
/4"-11
1
/2 Mechanical seal
The Part Nos above do not include electromagnetic clutch.
Other variants on request.
Electromagnetic clutch
Voltage Part No Pulley
12 V 0.3454.001 2xA
24 V 0.3454.002 2xA
12 V 0.3454.003 1xB
24 V 0.3454.004 1xB
To Next Page
Loading...
