Johnson Poker - Parts Identification; How to Use as a Handheld Immersion Blender; How to Use as a Beater

12
PARTS
A. Motor section
B. ON button
C. Immersion blender shaft
D. Shaft with whisker
E. Mixing disc
F. Mincing blade
H. Container
I. Container lid
L. Measuring beaker
M. Wall support
HOW TO USE AS A
HANDHELD IMMERSION BLENDER
- With plug disconnected.
- Mount the blending shaft (C) onto the
motor section (A). Align the small triangle
on the blending shaft to the triangle on the
motor section. Press down and turn in a
clockwise direction.
- Insert the plug into a compatible power
outlet.
- Immerse part of the blending shaft into
the recipient containing the food to pro-
cess.
Do not place too much food in the recipient
and do not immerse the blending shaft
below the limit. This prevents food from
coming out of the container when the ap-
pliance is running, or the motor section
from damaging due to contact with the
food to process.
- Press the START button (B) avoiding con-
tinuous operation for periods longer than
25 seconds. Release the button at intervals
to allow the motor to cool and rest.
If the appliance overheats after continuous
use, let it rest for 10 minutes until it cools
down completely.
- Disconnect the plug from the power ou-
tlet after use. Disassemble and clean the
blending shaft and motor section before
putting the appliance away or before be-
ginning a new processing.
HOW TO USE AS A BEATER
- With plug disconnected
- Assemble the whisking shaft (D) to the
motor section (A). Align the small triangle
of the whisking shaft to the triangle of the
motor section. Press down and turn in a
clockwise direction.
- Insert the plug into a compatible power
outlet.
- Immerse part of the whisker into the re-
cipient containing the food to process.
Do not place too much food in the recipient
and do not immerse the whisker below the
limit. This prevents food from spilling out
of the container when the appliance is run-
ning, or the motor section from damaging
due to contact with the food to process.
ATTENTION:
If the need should arise to take or send the appliance to an authorised service centre,
make sure to clean all its parts thoroughly.
For hygienic purposes, the service centre shall reject appliances that are not perfectly
clean on the outside or inside without making any controls or repairs.
The symbol on the product or on its packaging indicates that this product may
not be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential ne-
gative consequences for the environment and human health, which could otherwise
be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please contact your
local city office, your household waste disposal service or the shop where you pur-
chased the product.