32
Multifunction button:
motor on / off, speed limiter, light on / off
Switch PUMA on and off
To switch on and off, press the multifunction button for about 3 seconds.
Activate/deactivate speed level
PUMA has 3 speed modes:
“Eco” 6 Km / h (the letter “S” appears in blue on the display)
“Normal” 15/20 Km / h (the letter “S” appears in yellow on the display)
“Sport” 25 Km / h (the letter “S” appears in red on the display)
Each time the power is turned on, the mode is “eco”
To change the set speed level: press the button once, the letter “S” will appear in “yel-
low” on the display, indicating that the selected mode is: “normal”
pressing the button once more, the letter “S” appears in red on the display indicating
that the selected mode is: “sport”
To return to “eco” mode, letter “S” in “blue” color, repeat the sequence described above.
Turn on / off the front and rear led light
PUMA is equipped with front and rear led lights. After turning on the scooter, press
the multifunction button quickly 2 times to turn on / off both LED lights, the headlight
symbol appears or disappears on the display. Attention the front led is white light while
the rear led is fixed red light. Press the electric brake to make the red led rear light flash.
Speed indicator
To change from Km / h to Mp / h and vice versa, quickly press the multifunction button
3 times.
Cruise control
To activate the “cruise control”, maintain the desired speed for about 6 seconds, an
acoustic signal confirms the insertion.
To deactivate the cruise control mode, press the accelerator lever or the electric brake
lever.
To Next Page
Loading...