Johnston V Series - User Manual

Johnston Sweepers Limited
Foreword
General Arrangement
Controls
Operation
Optional Equipment
V Range Suction Sweepers
Incorporating
VT501 ● 651 ● 801
Twin engine machines
&
VS501 ● 651 ● 801
Single engine, Hydrostatic machines
Part No 01282-1-GB (A5 size)
Revision Level 02
E.C.M. Issue - 711837 Print date - 03.02.2014
F
1
2
3
4
Operator’s
Guide
Johnston Visual Module
Routine Maintenance
5
6
Conformity Certificates
7
VT - Twin Engine
VS - Single Engine
Specific to Twin engine sweepers.
Specific to Single engine sweepers.
All Copyright and rights are the property of Johnston Sweepers Ltd

Summary

Foreword and Introduction

General Safety Notices

Highlights critical safety information and symbols used throughout the manual for user protection.

Operator Controls and Interface

Cab Mounted Control Stations

Describes the location and function of controls within the vehicle cab.

External Control Locations

Sweeping Operation Controls

Explains controls specifically used for activating and managing sweeping functions.

Machine Operation Procedures

Engine Starting and Handling

Provides step-by-step instructions for starting and managing the engine for VT and VS models.

Commence Sweeping Operations

Guides users through the process of preparing and starting the sweeping function.

Terminate Sweeping and Drainage

Details procedures for safely stopping sweeping operations and draining water systems.

Load Discharge and Body Prop Safety

Explains safe methods for discharging loads and using the auto body prop.

Cold Weather Operating Precautions

Johnston Visual Module (JVM) Operation

JVM Safety and Precautions

JVM Power On and Display Screens

JVM Main Menu and Navigation

JVM System Fault Diagnosis

Routine Maintenance Procedures

Daily and Weekly Maintenance Checks

Lists essential daily and weekly checks for operators to ensure machine readiness.

Scheduled Maintenance Services (VT)

Details service intervals and tasks for the VT - Twin Engine model (500-4000 hours).

Scheduled Maintenance Services (VS)

Details service intervals and tasks for the VS - Single Engine model (500-2000 hours).

Channel Brush Adjustment and Replacement

Wide Sweep Brush Adjustment and Replacement

Nozzle and Rubber Component Adjustment

VT - Twin Engine Lubrication Points

VS - Single Engine Lubrication Points

Johnston V Series Specifications

General

Brand	Johnston
Model	V Series
Category	Blower
Language	English