Joie Stages User Manual

13 14
14
15
3
2
1
16
7. Thread the diagonal belt through the locking
clip﹐ and then fasten the locking clip.
14
8. Refasten the locking clip.
15
! Please check if child restraint is installed
tightly by moving the child restraint back and
forth at the vehicle belt path. Please
reference vehicle owner's manual for more
information. (Child restraint should not move
more than 25mm/1").
Correctly assembled vehicle belt is shown in
16
.
! Vehicle waist belt passes through the vehicle waist belt slots﹐ as show in
16
- 1
.
! Vehicle shoulder belt must pass through the rear-facing vehicle shoulder belt slots﹐ as shown in
16
- 2
.
! The vehicle buckle tongue is engaged with the buckle correctly﹐ as shown in
16
- 3
.
ii. Securing your Child in the Child restraint
see images
17
-
22
Note
1. Infant insert is for child's protection. Child 0-6 months must use infant insert.
2. Please install the child restraint on the vehicle seat, and then place the child in the child restraint.
3. After the child is placed into the child restraint, check whether the shoulder harness straps are at the
proper height. Please refer to images 6-7 (Height Adjustment for Head Support and Shoulder Harness
Straps).

Joie Stages Specifications

General

Weight range	0-25 kg
Harness type	5-point harness
Group	0+/1/2
Side Impact Protection	Yes
Weight	8.86 kg
Isofix	No
Washable Cover	Yes
Compatibility	Universal
Age range	Birth to approx. 7 years
Installation	3-point car seat belt
Rearward facing	Up to 18 kg
Forward facing	9-25 kg
Recline positions	4 recline positions
Headrest	Adjustable headrest