Jolly logic ALTIMETERTWO User Manual

jolly logic
jolly logic
10
Recharging
Plug AltimeterTwo into any USB port to recharge. If you don’t see a light
when you plug it in, the USB port must not have power. Try another one.
Red Light
Your altimeter is charging correctly. Recharging
should be complete in less than 2 hours.
Green Light
Your altimeter is 100% charged.
Red + Green Light
Problem! Either this USB port is not providing
enough power, or your battery has a problem.
1. Try another USB port.
2. Open your altimeter and make sure the
battery connector is snapped in. See our
website for instructions on how to do this.
3. Contact support@jollylogic.com.
Does It Hurt to Charge It All the Time?
Nope. In fact, Lithium Polymer batteries like the one in the AltimeterTwo
prefer to be charged all the time, and there’s no “memory effect” to worry
about. However, running down below zero charge will ruin them over time.
What Type of Connector Does AltimeterTwo Have?
The very common USB Micro-B

Jolly logic ALTIMETERTWO Specifications

General

Brand	Jolly logic
Model	ALTIMETERTWO
Category	Measuring Instruments
Language	English