- 7 -
5.Description of the device
DMX Terminator Diagram
-For installations where the DMX cable has to run a long distance or
is In an electrically noisy environment it is recommended to use a
DMX terminator. This help in preventing corruption of the signal by
electrical noise. The DMX terminato r is simply an XLR plug witha
120 resistor connected between pins 2 and pins3, which is then
plugged into a the output XLR socket of the last ifxture in the chain.
Ω
1
2
3
120Ω
PIN2
PIN3
Head
Tilt °,
210 Fixture could auto
reset.
3.
Arm
Pan °,540 Fixture could auto
reset.
Base
2.
1.
18.WDMX wire
BACK PANEL
4.5- pin XLR female
5.3- pin XLR female
6.Power-in
7. Power switch
8.Main Fuse
9.3- pin XLR male
10.5-pin XLR male
11.Network interface
CINTROL PANEL
12.DOWN button
13.Status indicator lamp
14.ENTER button
15.Touch screen(LCD display)
16.MODE button
17.UP button
18.WDMX Wire
Standard edition
Online edition
17
13
15
16
14
10 9
8
6
5
4
7
7
10
8
11
4
11
12
6
To Next Page
Loading...