Model: JOLT6SM2
PLEASE NOTE: Your device may be in a low battery mode when
you first receive it. We recommend charging before initial set
up of the device, as this will wake up the device from its low
battery mode once fully charged. This may take 2 full charging
cycles.”
Ensure the BT is enabled on your mobile phone.
Enter the App and select the “Set” icon menu from the bottom
menu bar. Select the “Bind Devices” banner. Select Model:
JOLT6SM2 and this will automatically pair. (To remove the device
pairing, select the “Remove” Icon in the “Set Menu” and select
confirm. This will delete all data and remove device pairing.
Device Pairing
To Next Page
Loading...