JONATHAN Y JYL2054A - User Manual

To Next Page

WARNING

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

Model# JYL2054A

Product Dimensions: 13"L X 13"W X 27"H

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this lamp cannot be replaced;

If the cord is damaged, the lamp shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of

electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the

plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be

f ll i t d d t tt t t di d thi f t f t

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY

A Lamp base 1X E Shade 1X

B Saddle 1X F Finial 1X

C Socket 1X G Bulb 1X

D Harp 1X

nserte

o not attempt to

sregar

s sa

ety

eature.

Part List and Hardware List

Need help?

Do you have a question about the JONATHAN Y JYL2054A and is the answer not in the manual?

Summary

Notice & Important Safety Instructions

Safety and Assembly Precautions

Check parts, assemble on soft surface, follow electrical safety, and cord guidelines to prevent hazards.

Preparation and Assembly

Bulb Usage Guidelines

Use specified bulb types (A, CFL, LED) with wattage limits for safe operation.

Assembly Steps

Follow numbered steps for inserting parts, attaching the shade, and checking stability.

Summary

Notice & Important Safety Instructions

Safety and Assembly Precautions

Check parts, assemble on soft surface, follow electrical safety, and cord guidelines to prevent hazards.

Preparation and Assembly

Bulb Usage Guidelines

Use specified bulb types (A, CFL, LED) with wattage limits for safe operation.

Assembly Steps

Follow numbered steps for inserting parts, attaching the shade, and checking stability.

This document provides instructions for the assembly, use, and maintenance of the JONATHAN Y Model# JYL2054A lamp.

Function Description:

The JYL2054A is a portable electric lamp designed to provide illumination. It consists of a lamp base, saddle, socket, harp, shade, finial, and a bulb. The lamp operates by inserting a bulb into the socket, which is then covered by a shade. Power is supplied via a polarized plug, which is a safety feature to reduce the risk of electric shock. The lamp is intended for indoor use and is designed for easy assembly.

Important Technical Specifications:

Model Number: JYL2054A
Product Dimensions: 13"L X 13"W X 27"H
Bulb Type Compatibility:
- ON/OFF Type "A" Bulb: Maximum 100-Watt
- CFL Bulb: Maximum 23-Watt
- LED Bulb: Maximum 12-Watt
Included Bulb: The lamp comes with an LED 9-Watt bulb.
Plug Type: Polarized plug (one blade is wider than the other) for safety.
Electrical Safety: Designed with a polarized plug to reduce the risk of electric shock. It must be used with a polarized outlet. If the plug does not fit, it should be reversed. If it still does not fit, a qualified electrician should be contacted. Extension cords should only be used if the plug can be fully inserted into them.
External Cable/Cord: The external flexible cable or cord cannot be replaced. If damaged, the lamp must be destroyed.

Usage Features:

Assembly: The lamp is designed for straightforward assembly, with an estimated assembly time of 6 minutes. Users are instructed to ensure all parts are present and undamaged before starting. Assembly involves inserting the harp into the saddle, placing the shade on the harp, tightening the finial, and inserting the bulb into the socket.
Operation: Once assembled and plugged into a suitable polarized outlet, the lamp provides light. The specific mechanism for turning the lamp on/off (e.g., a switch on the cord or base) is not explicitly detailed but is implied by the "ON/OFF Type 'A' Bulb" specification.
Stability Check: After assembly, users are advised to place the lamp on a level surface to ensure stability.
Safety Instructions:
- Always inspect the item carefully for damage or defects before installation. Do not install if damaged, as it cannot be returned once installed.
- Assemble the item on a soft surface to prevent scratching the finish.
- Follow guidelines for safe use and installation to reduce the risk of fire, electrical shock, or injury.
- Never attempt to disregard the polarized plug safety feature.
- Do not use the lamp if the external cable or cord is damaged; the lamp should be destroyed in such a case.

Maintenance Features:

Cleaning:
- Always unplug the lamp before cleaning.
- Shades: Dust with a feather duster or an appropriate vacuum-brush attachment.
- Lamp Bases: Wipe with a soft, dry cloth. Clean lamp bases using methods appropriate to the material of the base.
- Chemicals: Avoid the use of chemicals and household cleaners, as they may damage the finish of the lamp.

Part List (for assembly):

A: Lamp base (1X)
B: Saddle (1X)
C: Socket (1X)
D: Harp (1X)
E: Shade (1X)
F: Finial (1X)
G: Bulb (1X)

The manual emphasizes the importance of safety, particularly regarding the polarized plug and the condition of the power cord. It also provides clear, step-by-step instructions for assembly and general care to ensure the longevity and safe operation of the lamp.