PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes
H
.
PLEASE USE ON/OFF TYPE"A" BULB MAX 60-WATT OR EDISON BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT
THERE ARE TWO 25-WATT EDISON BULBS IN THE BOX
C D
B4
E
G
F
B3
B2
B1
A
Step 1 Step2 Step3
Make sure all parts could be aligned before assemble
Insert the Harp (E) into the Metal cap (F). Put the light on a level surface to check
Do not rotate lamp body too hard avoid base screw broke
Put the shade(D) on the Harp(E),then if everything is stable.
Screw the Lamp body (B1) onto the Lamp base (A) tighten the Finial (H)into the Harp (E)
Screw the Lamp body (B2) onto the Lamp body (B1) Insert the bulb(F) into the socket(C).
S th L b d (B3) t th L b d (B2)
Screw the Lamp body (B3) onto the Lamp body(B2)
Screw the Lamp body (B4) onto the Lamp body(B3)
Screw the Socket (C) onto the Lamp base(B4)
Be careful not to twist the power cord and tighten securely
ENJOY YOUR LAMP
To Previous Page
Loading...
Need help?
General
