JONATHAN Y JYL4033 - User Manual

To Next Page

WARNING

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN

INSTALLED.

CARE AND MAINTENANCE

Model# JYL4033

Product Dimensions: 10 x 10 x 21"H

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this lamp cannot be replaced;

If the cord is damaged, the lamp shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension

cord unless the plug can be fully inserted. do not attempt to disgard this safety feature.

Part List and Hardware List

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY

A Lamp base 1X E Harp 1X

B Neck 1X F Shade 1X

C Saddle 1X G Finial 1X

D Socket 1X H Bulb 1X

Need help?

Do you have a question about the JONATHAN Y JYL4033 and is the answer not in the manual?

Summary

Product Warnings and Safety

Inspection Before Installation

Inspect the item carefully for damage or defects before attempting installation. Do not install if damaged.

Care and Maintenance Guidelines

Unplug lamps before cleaning. Dust with feather duster or vacuum. Wipe bases with soft, dry cloth. Avoid chemicals.

Important Safety Instructions

Ensure all parts are present. Assemble on a soft surface. Follow guidelines for safe use and installation.

Cord and Plug Safety

Lamp cord cannot be replaced; destroy if damaged. Polarized plug fits outlet one way; do not discard safety feature.

Product Assembly Preparation

Pre-Assembly Check

Before assembly, verify all parts are present by comparing with package and hardware contents lists.

Assembly Steps

Connect neck to base, attach harp to saddle, place shade on harp, tighten finial, and insert bulb into socket.

Final Stability Check

After assembly, place the light on a level surface to confirm stability.

Summary

Product Warnings and Safety

Inspection Before Installation

Inspect the item carefully for damage or defects before attempting installation. Do not install if damaged.

Care and Maintenance Guidelines

Unplug lamps before cleaning. Dust with feather duster or vacuum. Wipe bases with soft, dry cloth. Avoid chemicals.

Important Safety Instructions

Ensure all parts are present. Assemble on a soft surface. Follow guidelines for safe use and installation.

Cord and Plug Safety

Lamp cord cannot be replaced; destroy if damaged. Polarized plug fits outlet one way; do not discard safety feature.

Product Assembly Preparation

Pre-Assembly Check

Before assembly, verify all parts are present by comparing with package and hardware contents lists.

Assembly Steps

Connect neck to base, attach harp to saddle, place shade on harp, tighten finial, and insert bulb into socket.

Final Stability Check

After assembly, place the light on a level surface to confirm stability.

This document outlines the assembly, usage, and maintenance instructions for a portable lamp, Model# JYL4033. The lamp is designed for indoor use and features a traditional aesthetic, with components such as a lamp base, neck, saddle, socket, harp, shade, finial, and bulb.

Function Description

The primary function of this device is to provide illumination. It operates by screwing a neck component onto a lamp base, which then connects to a socket. A harp is inserted into a saddle, supporting a shade, and a finial secures the shade in place. Finally, a bulb is inserted into the socket to complete the assembly and enable the lamp to emit light. The lamp is designed to be placed on a level surface, such as a table, to ensure stability during operation. It utilizes a polarized plug as a safety feature, which is designed to fit into a polarized outlet in only one way, thereby reducing the risk of electric shock.

Usage Features

Before assembly, users are instructed to carefully inspect all parts to ensure none are missing or damaged. Assembly should be performed on a soft surface to prevent scratching the lamp's finish. The assembly process involves three main steps:

Connecting the Neck to the Base: The power cord is pulled to connect the neck (B) to the lamp base (A), and the neck is then screwed onto the lamp base. Care must be taken not to twist the power cord, and the connection should be tightened securely.
Assembling the Harp, Shade, Finial, and Bulb: The harp (E) is inserted into the saddle (C). The shade (F) is placed onto the harp (E), and the finial (G) is tightened into the harp (E) to secure the shade. Finally, the bulb (H) is inserted into the socket (D).
Final Placement and Stability Check: After assembly, the lamp should be placed on a level surface to verify its stability.

The lamp is designed to be used with specific bulb types to ensure safe and optimal performance. It requires an ON/OFF Type "A" bulb with a maximum of 40 watts, or a CFL bulb with a maximum of 13 watts, or an LED bulb with a maximum of 9 watts. A 4-watt LED bulb is included in the package. Users are cautioned against replacing the external flexible cable or cord if it becomes damaged; in such a case, the entire lamp should be discarded. The polarized plug is a critical safety feature, and users are advised to ensure it fits fully into the outlet. If it does not, the plug should be reversed. If it still does not fit, a qualified electrician should be contacted. The lamp should never be used with an extension cord unless the plug can be fully inserted into it, and users should not attempt to bypass or alter this safety feature.

Maintenance Features

To ensure the longevity and appearance of the lamp, specific maintenance guidelines are provided:

Cleaning: Before using any cleaning solutions, the lamp should be unplugged. Shades can be dusted with a feather duster or a vacuum-brush attachment. Lamp bases should be cleaned with a soft, dry cloth and methods appropriate to the material of the base.
Chemical Avoidance: Users are advised to avoid the use of chemicals and household cleaners, as these can damage the lamp's finish.
Damage Inspection: It is crucial to inspect the item carefully before attempting to install it. If any damage or obvious defect is found, the lamp should not be installed, as it cannot be returned once installed.

These instructions emphasize safety and proper handling to ensure a satisfactory user experience and to maintain the lamp's condition over time.

JONATHAN Y JYL4033 Specifications

General

Product Type	Outdoor Light
Model Number	JYL4033
Brand	JONATHAN Y
Material	Metal
Finish	Black
Bulb Type	LED
Dimmable	No
Style	Modern
Number of Lights	1
Specific Uses	Outdoor
Special Features	Weather Resistant
Power Source	Hardwired
Lumens	800
Color Temperature	3000K
IP Rating	IP65
Maximum Compatible Wattage	9W
Voltage	120V
Wattage	9W