JONATHAN Y JYL6106A User Manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE
QUANTITY
A Lamp base 1X
B Shade 1X
C Ring 1X
D
Bulb
1X
Model# JYL6106A
Product Dimensions: D10" x 19.5"H
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disgard this safety feature.
Part List and Hardware List
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed

JONATHAN Y JYL6106A Specifications

General

Model Number	JYL6106A
Brand	JONATHAN Y
Material	Metal
Finish	Black
Number of Lights	1
Voltage	120V
Specific Uses	Outdoor
Special Features	Weather Resistant
Shade Material	Glass
Power Source	Hardwired
Type of Bulb	LED
Wattage	9W
Color Temperature	3000K
Lumens	800
IP Rating	IP44
Style	Modern
Color	Black
Product Type	Outdoor Lantern

Summary

General Warnings and Information

Product Inspection and Return Policy

Inspect the item carefully before installation. Do not install if damaged. Items cannot be returned once installed.

Care and Maintenance Instructions

Unplug lamps before cleaning. Dust shades with a feather duster or vacuum brush. Wipe bases with a soft, dry cloth.

Important Safety Instructions

Ensure all parts are present before assembly. Assemble on a soft surface to prevent scratches.

Assembly Preparation and Steps

Pre-Assembly Check

Verify all parts against the package and hardware lists before assembly.

Step 1: Lamp Base Setup

Place the lamp base on a table, ensuring the power cord is not twisted.

Step 2: Lamp Shade and Bulb Installation

Place the shade into the base, secure with the ring, and insert the bulb into the socket.

Step 3: Final Check

Position the light on a level surface to confirm stability.