JONATHAN Y JYL6206A User Manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE
QUANTITY
A Lamp body 1X D Shade 1X
B Socket 2X E
Finial
1X
C
Pole
1X
F Bulb 2X
Model# JYL6206A
Product Dimensions: 18"L X18"W X 31"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS

JONATHAN Y JYL6206A Specifications

General

Type	Outdoor Wall Light
Material	Metal
Finish	Black
Bulb Type	LED
Number of Bulbs	1
Bulb Included	Yes
Voltage	120V
IP Rating	IP65

Summary

WARNING

CARE AND MAINTENANCE

NOTICE & IMPORTANT SAFETY INSTRUCTIONS

Safety Guidelines for Use and Installation

Includes instructions on part verification, assembly surface, cord safety, and polarized plug usage for safe operation and installation.

Part List and Hardware List

PREPARATION AND ASSEMBLY

Bulb Type and Wattage Recommendation

Specifies recommended bulb types (A, CFL, LED) and maximum wattages for safe and optimal lamp performance.

Step 1: Lamp Assembly

Instructions for assembling the lamp base, socket, pole, shade, and finial, emphasizing cord management.

Step 2: Bulb Installation

Guidance on inserting the bulb into the lamp socket to complete the assembly process.

Step 3: Stability Check

Final step to place the lamp on a level surface and verify its stability after assembly.