JONATHAN Y JYL6203A - User Manual

To Next Page

PIECE DESCRIPTION PICTURE

QUANTITY

PIECE DESCRIPTION PICTURE

QUANTITY

A Lamp base 1X E Shade 1X

B Saddle 1X F

Finial

C Socket 1X

G Bulb 1X

D Harp 1X

Model# JYL6203A

Product Dimensions: 15"L X 15"W X 25"H

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this lamp cannot be replaced;

If the cord is damaged, the lamp shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension

cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.

Part List and Hardware List

WARNING

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

Need help?

Do you have a question about the JONATHAN Y JYL6203A and is the answer not in the manual?

Summary

Notice & Important Safety Instructions

Preparation and Assembly

Assembly Step 1: Harp, Shade, and Finial

Assemble the Harp (D) into the Saddle (B), attach the Shade (E), and tighten the Finial (F).

Assembly Step 2: Bulb Installation

Pinch the clip from base, replace with bulb, and insert bulb (G) into the socket (C).

Assembly Step 3: Stability Check

Place the lamp on a level surface to check if everything is stable.

Summary

Notice & Important Safety Instructions

Preparation and Assembly

Assembly Step 1: Harp, Shade, and Finial

Assemble the Harp (D) into the Saddle (B), attach the Shade (E), and tighten the Finial (F).

Assembly Step 2: Bulb Installation

Pinch the clip from base, replace with bulb, and insert bulb (G) into the socket (C).

Assembly Step 3: Stability Check

Place the lamp on a level surface to check if everything is stable.

This document provides instructions for the assembly, use, and maintenance of the JONATHAN Y Model# JYL6203A lamp.

Function Description:

The JYL6203A is a portable lamp designed to provide illumination. It features a lamp base, saddle, socket, harp, shade, finial, and a bulb. The lamp is designed for indoor use and requires assembly before operation.

Important Technical Specifications:

Model Number: JYL6203A
Product Dimensions: 15"L x 15"W x 25"H
Bulb Type: On/Off Type "A" bulb
Maximum Incandescent Bulb Wattage: 100-watt
Maximum CFL Bulb Wattage: 23-watt
Maximum LED Bulb Wattage: 12-watt
Included Bulb: LED 9-watt bulb
Plug Type: Polarized plug (one blade wider than the other) as a safety feature to reduce the risk of electric shock.
Cord: External flexible cable or cord, which is not replaceable. If damaged, the lamp must be destroyed.

Usage Features:

Assembly: The estimated assembly time is 6 minutes. Users are instructed to ensure all parts are present and to assemble the item on a soft surface to prevent scratching.
- Step 1: Insert the Harp (D) into the Saddle (B). Place the shade (E) on the Harp (D), then tighten the Finial (F) into the Harp (D).
- Step 2: Pinch the clip from the base, replace with the included 7W bulb (if applicable, though the document also states a 9W LED bulb is included), carefully put the clip back without twisting the cord, and insert the bulb (G) into the socket (C).
- Step 3: Place the lamp on a level surface to ensure stability.
Bulb Compatibility: The lamp is compatible with Type "A" bulbs, with specific wattage limits for incandescent (max 100W), CFL (max 23W), and LED (max 12W) bulbs. A 9-watt LED bulb is included with the product.
Safety Instructions:
- Always inspect the item carefully before attempting to install. Do not install if there is any damage or obvious defect, as the item cannot be returned once installed.
- Follow guidelines for safe use and installation to reduce the risk of fire, electrical shock, or injury.
- The polarized plug is a safety feature; ensure it fits fully into the outlet. If it doesn't, reverse the plug. If it still doesn't fit, contact a qualified electrician.
- Never use an extension cord unless the plug can be fully inserted into it. Do not attempt to disregard this safety feature.
- The external flexible cable or cord cannot be replaced. If the cord is damaged, the lamp must be destroyed.

Maintenance Features:

Cleaning:
- Always unplug lamps before using any cleaning solutions.
- Dust shades with a feather duster or an appropriate vacuum-brush attachment.
- Wipe lamp bases with a soft, dry cloth.
- Clean lamp bases using methods appropriate to the material.
- Avoid the use of chemicals and household cleaners, as they may damage the finish.