JONATHAN Y JYL6129A User Manual

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Model# JYL6129A
Product Dimensions: 13"Lx7"Wx 22.5"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an
extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X
B Shade 1X
C Ring 1X
D Bulb 1X
1/2

JONATHAN Y JYL6129A Specifications

General

Brand	JONATHAN Y
Model	JYL6129A
Category	Outdoor Light
Language	English

Summary

General Safety Warnings

Pre-Installation Inspection

Inspect the item carefully for any damage or defects before installation. Do not install if damaged.

Care and Maintenance Instructions

Important Safety Instructions

Cord Safety

The external flexible cable or cord of this lamp cannot be replaced; if damaged, the lamp shall be destroyed.

Polarized Plug Usage

This portable lamp has a polarized plug as a safety feature to reduce electric shock risk.

Part List and Hardware

Assembly Preparation

Parts Check and Assembly Surface

Ensure all parts are present and assemble on a soft surface to prevent scratching the finish.

Assembly Steps

Step 1: Lamp Base Placement

Place the lamp base on the table, being careful not to twist the power cord.

Step 2: Shade, Ring, and Bulb Installation

Attach the shade, screw the ring, and insert the bulb into the lamp base.

Step 3: Stability Check

Place the light on a level surface to check if everything is stable.