Step 1 Step 2 Step 3
Fasten the socket part (B) into the lamp body(A) Insert the bulb(F) into the socket(B). Put the light on a level surface to check
Fasten the pole (C) into the socket part (B). if everything is stable.
Be careful not to twist he power cord, tighten securely.
Put shade( D) onto the top of the pole (C )
and tighten by finial(E)
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT
THERE ARE 2PCS LED 9-WATT BULB IN THE BOX
To Previous Page
Loading...
Need help?
General
