JONATHAN Y JYL6106A - Assembly Preparation and Steps; Pre-Assembly Check; Step 1: Lamp Base Setup; Step 2: Lamp Shade and Bulb Installation

Step 1 Step 2 Step 3
Put the lamp base(A) on the table Put the lamp shade (B)into the lamp base(A) . Put the light on a level surface to check
Be careful not to twist the power cord and tighten securely Use the ring (C) to lock the lamp shade (B) if everything is stable.
Insert the bulb(D) into the socket
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT
THERE IS LED 4-WATT BULB IN THE BOX
ENJOY YOUR LAMP
1
2
3
A
A
C
D
B