JONATHAN Y JYL1089 - User Manual

To Next Page

PIECE DESCRIPTION PICTURE

QUANTITY

PIECE DESCRIPTION PICTURE QUANTITY

A Lamp base 1X F Harp 1X

B Lamp Body 1X G Shade 1X

C Neck 1X H Finial 1X

D Saddle 1X I Bulb 1X

E Socket 1X

Model# JYL1089

Product Dimensions: 15"L X 15"W X 60"H

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this luminaire cannot be replaced;

If the cord is damaged, the luminaire shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of

electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the

plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully

inserted. do not attempt to defeat this safety feature.

Part List and Hardware List

WARNING

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

Need help?

Do you have a question about the JONATHAN Y JYL1089 and is the answer not in the manual?

Summary

General Warnings and Safety

Item Inspection Before Installation

Inspect item carefully for damage or defects before attempting installation. Do not install if damaged.

Care and Maintenance Instructions

Unplug lamps before cleaning. Dust shades with feather duster or vacuum brush. Wipe bases with a soft cloth.

Important Safety Instructions

Ensure all parts are present. Assemble on a soft surface. Follow safety guidelines for electrical shock prevention.

Product Preparation and Assembly

Bulb Usage Guidelines

Use specified bulb types and wattages: Type A max 100W, CFL max 23W, or LED max 12W. An LED 9W bulb is included.

Assembly Step 1: Connecting Lamp Body Components

Align parts, screw neck onto body, connect lamp body sections, and attach to base without twisting the cord.

Assembly Step 2: Attaching Harp, Shade, and Bulb

Insert harp into saddle, place shade, secure with finial, and screw bulb into socket.

Assembly Step 3: Final Stability Check

Place the assembled lamp on a level surface to ensure stability.

Summary

General Warnings and Safety

Item Inspection Before Installation

Inspect item carefully for damage or defects before attempting installation. Do not install if damaged.

Care and Maintenance Instructions

Unplug lamps before cleaning. Dust shades with feather duster or vacuum brush. Wipe bases with a soft cloth.

Important Safety Instructions

Ensure all parts are present. Assemble on a soft surface. Follow safety guidelines for electrical shock prevention.

Product Preparation and Assembly

Bulb Usage Guidelines

Use specified bulb types and wattages: Type A max 100W, CFL max 23W, or LED max 12W. An LED 9W bulb is included.

Assembly Step 1: Connecting Lamp Body Components

Align parts, screw neck onto body, connect lamp body sections, and attach to base without twisting the cord.

Assembly Step 2: Attaching Harp, Shade, and Bulb

Insert harp into saddle, place shade, secure with finial, and screw bulb into socket.

Assembly Step 3: Final Stability Check

Place the assembled lamp on a level surface to ensure stability.

This document provides instructions for the assembly, care, and maintenance of a floor lamp, Model# JYL1089, manufactured by JONATHAN Y. The lamp is designed for indoor use and comes with a 9-watt LED bulb.

Function Description

The JYL1089 floor lamp serves as a lighting fixture for indoor spaces. It is designed to provide ambient or task lighting, depending on the bulb used and its placement. The lamp features a standard socket compatible with various bulb types, allowing users to customize the light output to their preference. Its assembly involves connecting several body parts, attaching a harp and shade, and inserting a bulb, culminating in a stable, freestanding light source. The lamp is equipped with a polarized plug, a safety feature intended to reduce the risk of electric shock by ensuring the plug fits into an outlet in only one orientation.

Usage Features

The lamp is designed for straightforward assembly and use. Users are guided through a three-step assembly process:

Body Assembly: The lamp's main body is constructed by screwing together the lamp neck (C), multiple lamp body sections (B3, B2, B1), and finally attaching them to the lamp base (A). It is crucial to align all parts correctly and tighten them securely without over-rotating to prevent damage to the base screw. Care must be taken to avoid twisting the power cord during this process.
Shade and Bulb Installation: Once the body is assembled, the harp (F) is inserted into the saddle (D). The shade (G) is then placed onto the harp, followed by tightening the finial (H) to secure the shade. Finally, the provided bulb (I) is screwed into the socket (E).
Stability Check: After complete assembly, the lamp should be placed on a level surface to verify its stability before regular use.

The lamp's electrical safety features include a polarized plug. If the plug does not fit fully into an outlet, users are instructed to reverse it. If it still does not fit, a qualified electrician should be contacted. The use of extension cords is permissible only if the plug can be fully inserted into the extension cord's receptacle. Users are explicitly warned against attempting to defeat this safety feature. The lamp is designed to operate with an ON/OFF switch and is compatible with various bulb types: a maximum 100-watt "A" type bulb, a maximum 23-watt CFL bulb, or a maximum 12-watt LED bulb. A 9-watt LED bulb is included in the box, offering an energy-efficient lighting solution right out of the package.

Maintenance Features

Maintaining the JYL1089 floor lamp involves simple and regular practices to ensure its longevity and appearance:

Cleaning Lamps: Before any cleaning, the lamp should always be unplugged from the power source to prevent electrical hazards.
Shade Cleaning: Lamp shades can be cleaned using a feather duster or an appropriate vacuum-brush attachment to remove dust and light debris.
Base Cleaning: The lamp base should be wiped with a soft, dry cloth. The cleaning method for the base should be appropriate for its material to avoid damage.
Chemical Avoidance: Users are advised to avoid the use of chemicals and harsh household cleaners, as these can damage the lamp's finish and materials.
Cord Integrity: The external flexible cable or cord of the luminaire is not replaceable. If the cord becomes damaged, the entire luminaire must be destroyed to prevent safety risks.
Pre-Installation Inspection: Upon receiving the product, users must carefully inspect all parts for any damage or obvious defects before attempting assembly. If any damage or defect is found, the item should not be installed, as it may not be returnable once installed. This emphasizes the importance of a thorough initial check to ensure the product is in perfect condition.
Assembly Surface: During assembly, it is recommended to work on a soft surface. This precaution helps prevent scratching the lamp's finish, preserving its aesthetic quality.

JONATHAN Y JYL1089 Specifications

General

Finish	Black
Bulb Type	LED
Style	Modern
Dimmable	No
Weather Resistant	Yes
Color	Black
Number of Bulbs	1
Bulb Base	E26
Power Source	Hardwired
UL Listed	Yes
Weight	2.2 Pounds
Type	Outdoor Wall Light
Material	Metal
Voltage	120 Volts
Lumens	800 Lumens
Color Temperature	3000K