JONATHAN Y JYL1033A - User Manual

To Next Page

WARNING

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Model# JYL1033A

Product Dimensions: 9"Lx 9"W x 20"H

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this lamp cannot be replaced;

If the cord is damaged, the lamp shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension

cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.

Part List and Hardware List

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY

A Lamp base 1X E Harp 1X

B Neck 1X F Shade 1X

C Saddle 1X G Finial 1X

D Socket 1X H Bulb 1X

Need help?

Do you have a question about the JONATHAN Y JYL1033A and is the answer not in the manual?

Summary

Important Safety Instructions

Polarized Plug Safety Feature

Explains the polarized plug's safety function to reduce electric shock risk.

Preparation and Bulb Information

Bulb Type and Wattage Recommendation

Specifies compatible bulb types and maximum wattage for safe operation.

Assembly Guide

Connecting Neck to Base

Instructions for connecting the lamp neck to the lamp base securely.

Attaching Shade and Bulb

Guide for attaching the harp, shade, finial, and inserting the bulb.

Final Stability Check

Procedure to place the lamp on a level surface and check stability.

This document provides instructions for the assembly, use, and maintenance of the JONATHAN Y Model# JYL1033A table lamp.

Function Description:

The JYL1033A is a portable table lamp designed to provide illumination. It features a polarized plug as a safety feature to reduce the risk of electric shock, ensuring proper electrical connection. The lamp is designed for indoor use and requires assembly before operation.

Important Technical Specifications:

Model Number: JYL1033A
Product Dimensions: 9"L x 9"W x 20"H
Bulb Type: ON/OFF Type "A"
Maximum Wattage (Incandescent): 40-Watt
Maximum Wattage (CFL): 13-Watt
Maximum Wattage (LED): 9-Watt
Included Bulb: LED 4-Watt bulb (in the box)
Plug Type: Polarized plug (one blade wider than the other)

Usage Features:

Assembly Required: The lamp comes disassembled and requires the user to connect the various components.
Polarized Plug Safety Feature: The lamp is equipped with a polarized plug. This means one blade is wider than the other, and it will only fit into a polarized outlet one way. If it doesn't fit initially, the user should reverse the plug. If it still doesn't fit, a qualified electrician should be contacted.
Extension Cord Usage: If an extension cord is used, it must allow the polarized plug to be fully inserted. Users are warned not to attempt to disregard this safety feature.
Bulb Compatibility: The lamp is designed to be used with ON/OFF Type "A" bulbs. It supports a maximum of 40-watt incandescent, 13-watt CFL, or 9-watt LED bulbs. A 4-watt LED bulb is included with the product.
Assembly Steps:
1. Step 1: Pull the power cord to connect the Neck (B) to the Base (A). Screw the Neck (B) onto the Lamp base (A). Care must be taken not to twist the power cord and to tighten securely.
2. Step 2: Insert the Harp (E) into the Saddle (C). Place the Shade (F) on the Harp (E), then tighten the Finial (G) onto the Harp (E). Insert the included Bulb (H) into the Socket (D).
3. Step 3: Once assembled, place the lamp on a level surface to check for stability.
Estimated Assembly Time: Approximately 6 minutes.
Pre-Assembly Check: Users are instructed to ensure all parts are present by comparing them with the provided Part List and Hardware List. If any part is missing or damaged, assembly should not be attempted.
Assembly Surface: It is recommended to assemble the item on a soft surface to prevent scratching the finish.

Maintenance Features:

Pre-Installation Inspection: Users are advised to inspect the item carefully before attempting to install it. If there is any damage or obvious defect, the item should not be installed. A warning states that the item may not be returned once it has been installed.
Cleaning Lamps: Unplug the lamp before using any cleaning solutions.
Cleaning Shades: Dust shades with a feather duster or an appropriate vacuum-brush attachment.
Cleaning Lamp Bases: Wipe lamp bases with a soft, dry cloth and clean them using methods appropriate to the material of the base.
Chemical Avoidance: Avoid the use of chemicals and household cleaners, as they may damage the finish of the lamp.
Cord Damage: The external flexible cable or cord of this lamp cannot be replaced. If the cord is damaged, the lamp shall be destroyed.
Safety Guidelines: To reduce the risk of fire, electrical shock, or injury to persons or property, users must follow the provided guidelines for safe use and installation.