JONATHAN Y JYL1051A - User Manual

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN
INSTALLED.
CARE AND MAINTENANCE
Model# JYL1051A
Product Dimensions: 15"Lx 15"W x 28"H
CARE
AND
MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate
to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
PIECE
DESCRIPTION
PICTURE
QUANTITY
PIECE
DESCRIPTION
PICTURE
QUANTITY
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTIT
Y
A Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
D Socket 1X H Bulb 1X

Summary

Product Safety and Care

General Warnings

Inspect item carefully for damage before installation. Do not install if defective.

Care and Maintenance

Instructions for cleaning lamps using soft cloths and appropriate methods. Avoid chemicals.

Important Safety Instructions

Ensure all parts are present, assemble on soft surface, follow polarized plug guidelines.

Part List and Hardware

Component Identification

Lists all components (A-H) and hardware required for assembly with descriptions and quantities.

Assembly Guide

Preparation and Bulb Information

Verify all parts are present and adhere to specified bulb wattage limitations.

Assembly Steps

Step-by-step instructions for assembling the lamp, from base to bulb.

Overview

1. Function Description
2. Usage Features
3. Maintenance Features

This document describes the assembly, care, and safety instructions for a portable lamp, Model# JYL1051A. The lamp is designed for indoor use and features a polarized plug for enhanced safety.

Function Description

The JYL1051A lamp serves as a portable lighting fixture, providing illumination through a replaceable bulb. It is designed for easy assembly and operation, making it suitable for various indoor settings. The lamp's structure includes a base, neck, socket, harp, shade, finial, and a bulb, all working together to produce light. The assembly process involves connecting these components in a specific sequence to ensure stable and functional operation. Once assembled, the lamp can be placed on a level surface to provide ambient or task lighting.

Usage Features

The lamp is designed for straightforward use with several key features to ensure safety and convenience:

• Polarized Plug: A crucial safety feature, the lamp is equipped with a polarized plug, meaning one blade is wider than the other. This design ensures that the plug can only be inserted into a polarized outlet in one specific orientation, reducing the risk of electric shock. Users are advised to ensure the plug fits fully into the outlet. If it doesn't, they should reverse the plug. If it still doesn't fit, a qualified electrician should be contacted. The use of an extension cord is only recommended if the plug can be fully inserted into it. Users should never attempt to bypass this safety feature.
• Bulb Type and Wattage: The lamp is designed to accommodate specific bulb types and wattages to ensure safe and efficient operation. It requires an ON/OFF Type "A" bulb with a maximum of 100 watts, or a CFL bulb with a maximum of 23 watts, or an LED bulb with a maximum of 12 watts. A 9-watt LED bulb is included in the box, providing an immediate lighting solution. Adhering to these specifications is important to prevent overheating and potential damage to the lamp or electrical system.
• Simple Assembly: The assembly process is designed to be quick and easy, with an estimated assembly time of 6 minutes. It involves connecting the neck to the lamp base, inserting the harp into the saddle, placing the shade on the harp, tightening the finial, and finally, inserting the bulb into the socket. Clear instructions and diagrams are provided to guide the user through each step.
• Stable Placement: After assembly, users are instructed to place the lamp on a level surface to ensure stability. This prevents accidental tipping and potential damage or injury.
• Cord Management: During assembly, users are advised to be careful not to twist the power cord while screwing the neck onto the lamp base. This helps prevent damage to the cord and ensures safe electrical connection. The external flexible cable or cord of this lamp cannot be replaced; if the cord is damaged, the lamp must be destroyed to prevent hazards.

Maintenance Features

Proper care and maintenance are essential to prolong the life and maintain the appearance of the lamp. The following guidelines are provided:

• Pre-Installation Inspection: Before attempting to install the lamp, users are instructed to carefully inspect the item for any damage or obvious defects. If any damage or defect is found, the item should not be installed, as it may not be returnable once installed. This proactive step helps ensure that only functional and safe products are put into use.
• Cleaning Lampshades: Lampshades can be cleaned using a feather duster or an appropriate vacuum-brush attachment. This gentle method helps remove dust without damaging the shade material.
• Cleaning Lamp Bases: Lamp bases should be wiped with a soft, dry cloth. The cleaning method should be appropriate to the material of the lamp base.
• Avoid Harsh Chemicals: Users are strongly advised to avoid the use of chemicals and household cleaners on the lamp base, as these can damage the finish. Sticking to a soft, dry cloth or material-appropriate cleaning methods helps preserve the lamp's aesthetic and structural integrity.
• Unplug Before Cleaning: For safety, lamps should always be unplugged before using any cleaning solutions or performing any maintenance. This prevents the risk of electrical shock during cleaning.
• Soft Surface Assembly: To prevent scratching the finish during assembly, users are advised to assemble the item on a soft surface. This simple precaution helps maintain the lamp's appearance from the very beginning.

JONATHAN Y JYL1051A Specifications