JONATHAN Y JYL1018A User Manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE
QUANTITY
A Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
D Socket 1X H Bulb 1X
Model#JYL1018A
Product Dimensions: 14"Lx 14"W x 26"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS

JONATHAN Y JYL1018A Specifications

General

Number of Lights	1
Bulb Type	LED
Shade Material	Glass
Color Temperature	3000K (Warm White)
Product Name	JONATHAN Y JYL1018A
Category	Outdoor Lighting
Specific Uses	Outdoor

Summary

General Warnings

Licensed Electrician Recommendation

Recommends installation by a licensed electrician for safety and proper setup.

Electrical Supply Shutoff

Emphasizes switching off the main electrical supply before installation to prevent shock.

Pre-Installation Inspection

Instructs to inspect for damage before installation and not to install if defective.

Care and Maintenance

Cleaning Guidelines

Details cleaning methods using feather dusters, soft cloths, and avoiding chemicals to protect the finish.

Important Safety Instructions

Pre-Assembly and Usage Safety

Ensures all parts are present, assembly on a soft surface, and following guidelines for safe use and installation.

Cord and Plug Safety Features

Warns against cord replacement if damaged and explains the polarized plug safety feature for shock reduction.

Assembly Preparation

Part Verification

Verify all parts against the package and hardware contents lists before beginning assembly.

Bulb Type Recommendation

Specifies recommended bulb types and wattages for optimal performance and safety.

Assembly Steps

Step 1: Connecting Neck to Base

Connect the power cord to the Neck (B) and screw the Neck onto the Lamp base (A) securely.

Step 2: Attaching Harp, Shade, and Bulb

Insert Harp into Saddle, place Shade on Harp, tighten Finial, and screw Bulb into socket.

Step 3: Stability Check

Place the assembled light on a level surface to ensure it is stable.