JONATHAN Y JYL1066A User Manual

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Model# JYL1066A
Product Dimensions: 17"Lx 17"W x 31"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
D Socket 1X H Bulb 1X

JONATHAN Y JYL1066A Specifications

General

Brand	JONATHAN Y
Model	JYL1066A
Category	Outdoor Light
Language	English

Summary

Care and Maintenance

General Cleaning Guidelines

Instructions for dusting lamp shades and wiping lamp bases with soft, dry cloths and appropriate materials.

Safety and Installation Notices

Pre-Assembly Safety Checks

Verify all parts are present and assemble on a soft surface to prevent scratching the finish.

Polarized Plug and Cord Safety

Information on polarized plug usage, cord replacement prohibition, and extension cord warnings for shock prevention.

Part List

Assembly Instructions

Preparation and Bulb Type

Verify parts, check assembly time, and note bulb type limitations for safe operation.

Step 1: Connecting Base and Neck

Connect the power cord to the neck and screw the neck securely onto the lamp base.

Step 2: Installing Harp, Shade, and Bulb

Assemble the harp, attach the shade, secure the finial, and insert the bulb into the socket.

Step 3: Final Stability Check

Place the assembled lamp on a level surface to ensure it is stable.