To Next PageTo Next Page
Need help?Do you have a question about the JONATHAN Y JYL1049A and is the answer not in the manual?
Specifies acceptable bulb types and maximum wattages for optimal lamp performance.
Guide on attaching the lamp neck to the base, ensuring secure connection without twisting the power cord.
Instructions for inserting the harp, placing the shade, securing the finial, and installing the bulb.
Procedure to place the assembled lamp on a level surface and verify its stability.
Specifies acceptable bulb types and maximum wattages for optimal lamp performance.
Guide on attaching the lamp neck to the base, ensuring secure connection without twisting the power cord.
Instructions for inserting the harp, placing the shade, securing the finial, and installing the bulb.
Procedure to place the assembled lamp on a level surface and verify its stability.
This document provides instructions for the assembly, use, and maintenance of a portable lamp.
This lamp is designed to provide illumination in indoor settings. It operates by connecting a neck assembly to a lamp base, inserting a bulb into a socket, and then attaching a shade and finial to complete the fixture. The lamp utilizes a polarized plug as a safety feature to reduce the risk of electric shock. This means one blade of the plug is wider than the other, and it will only fit into a polarized outlet in one specific orientation. If the plug does not fit initially, it should be reversed. If it still does not fit, a qualified electrician should be contacted. The lamp should never be used with an extension cord unless the plug can be fully inserted into the extension cord's outlet. Disregarding this safety feature is not recommended.
The lamp is designed for straightforward assembly and operation. Before beginning assembly, it is crucial to ensure all parts are present and undamaged. Any damaged or missing parts should prevent assembly, as the item may not be returnable once installed. The assembly process involves pulling the power cord to connect the neck to the base, then screwing the neck onto the lamp base. Care should be taken not to twist the power cord during this step, and the connection should be tightened securely. Next, the harp is inserted into the saddle, followed by placing the shade onto the harp. The finial is then tightened onto the harp to secure the shade. Finally, the bulb is inserted into the socket. Once assembled, the lamp should be placed on a level surface to ensure stability before use. The lamp is designed to use an ON/OFF Type "A" bulb with a maximum wattage of 100 watts, or a CFL bulb with a maximum wattage of 23 watts, or an LED bulb with a maximum wattage of 12 watts. A 9-watt LED bulb is included in the box. The estimated assembly time for this lamp is approximately 6 minutes. It is recommended to assemble the item on a soft surface to prevent scratching the finish. To reduce the risk of fire, electrical shock, or injury, all safety guidelines for safe use and installation must be followed. The external flexible cable or cord of this lamp cannot be replaced; if the cord is damaged, the lamp should be destroyed.
Proper maintenance helps ensure the longevity and appearance of the lamp. Before using any cleaning solutions, the lamp should be unplugged. For cleaning the shades, a feather duster or an appropriate vacuum-brush attachment can be used to remove dust. The lamp bases should be cleaned with a soft, dry cloth, using methods appropriate to the material of the base. It is important to avoid the use of chemicals and household cleaners, as these can damage the finish of the lamp. Regular cleaning and adherence to these guidelines will help maintain the lamp's aesthetic and functional quality over time.
General| Product Name | JONATHAN Y JYL1049A |
|---|---|
| Category | Outdoor Light |
| Material | Metal |
| Finish | Black |
| Bulb Type | LED |
| Number of Bulbs | 1 |
| Voltage | 120V |
| Style | Modern |
| Length | 8 inches |
| IP Rating | IP44 |
